Installation Guide

ManualsBrandsDelta ManualsKitchenPivotal Single-Handle Pull-Out Sprayer Kitchen Faucet in Arctic Stainless

PULLOUT AND PULL-DOWN KITCHEN SUITE WITH RIBBON

SPOUT

SET DE COCINA CON SURTIDOR ESTILIZADO EXTRAÍBLE Y

DESLIZABLE HACIA ABAJO

ROBINET À BEC RUBAN RÉTRACTABLE POUR LA CUISINE

Model/Modelo/Modèle

PIVOTAL

™

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

11/06/2017 Rev. C

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave

Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your

Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

Pour installer votre robinet

Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

91866

9693-DSTp

9693T-DSTp

To access additonal technical documents & product info, visit www.deltafaucet.com/p/Your-Model-Number-Here

(example: www.deltafaucet.com/p/9159T-DST)

Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.deltafaucet.

com/p/Your-Model-Number-Here (ejemplo: www.deltafaucet.com/p/9159T-DST)

Pour avoir accès à des documents techniques supplémentaires et à de l’information sur le produit, visitez www.delta-

faucet.com/p/Votre-numéro-de-modèle-ci (exemple : www.deltafaucet.com/p/9159T-DST)

www.deltafaucet.com

1-800-345-DELTA (3358)

customerservice@deltafaucet.com

3/32" (2.38 mm)

9193-DSTp

9193T-DSTp

4193-DSTp

9993-DSTp

9993T-DSTp

Summary of content (16 pages)

PAGE 1
91866 Model/Modelo/Modèle PULLOUT AND PULL-DOWN KITCHEN SUITE WITH RIBBON SPOUT SET DE COCINA CON SURTIDOR ESTILIZADO EXTRAÍBLE Y DESLIZABLE HACIA ABAJO ROBINET À BEC RUBAN RÉTRACTABLE POUR LA CUISINE PIVOTAL™ Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. 4193-DSTp 9193-DSTp 9193T-DSTp 9693-DSTp 9693T-DSTp 9993-DSTp 9993T-DSTp You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 3/32" (2.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
91866 Rev.
PAGE 4
PIVOTAL™ Models/Modelos/Modèles 9193-DST, 9993-DST, 9193T-DST & 9993T-DST RP92602p Kitchen Spout Assembly with Magnet Ensamble del Tubo de Salida Bec RP92601p Bar/Prep Spout Assembly with Magnet Ensamble del Tubo de Salida Bec RP80977 Wand Retainer & Kit Retenedor del mango y juego de piezas Pièce de retenue de douchette et trousse RP91902 Cartridge Assembly Ensamble del la Válvula Soupape RP93285 Retainer Funda Douille RP92600p Sprayer Assembly Ensamble de Rociador Pulvérisateur RP93282p Handle, Set
PAGE 5
RP93410 Filter Filtro Filtre EP92546 Solenoid Assembly Ensamble de Solenoide Électrovanne For PC, SS, AR & KS finishes, order EP92546 For PL, MW, RB & SP finishes, order EP92546 Para acabados PC, SS, AR y KS, ordene EP92546 Para acabados PL, MW, RB y SP, ordene EP92546 RP13938 O-Ring (2) Anillo “O” (2) Joint torique (2) Pour les finis PC, SS, AR et KS, commandez EP92546 Pour les finis PL, MW, RB et SP, commandez EP92546 EP73954 9 Volt Power Supply (Accessory Order Only) Fuente de alimentación de 9 volti
PAGE 6
Touch2O® 9193T-DST 9693T-DST 9993T-DST 2 1 1 1 1 2 2 6 Slide base plate over hose assembly, ensure tab on base plate tab (1) is in the rear of the faucet for proper contact. Slide base plate over hose assembly, ensure tab on base plate tab (1) is in the rear of the faucet for proper contact. Slide base plate over hose assembly, ensure tab on base plate tab (1) is in the rear of the faucet for proper contact. Ensure tab on base (6) is in sink hole.
PAGE 7
OPTIONAL ESCUTCHEON INSTALLATION INSTALACIÓN OPCIONAL DE UNA CHAPA INSTALLATION DE LA PLAQUE DE FINITION FACULTATIVE 1 2 9 3 2 6 9 3 4 8 4 5 5 For optional installations using the 10 1/2” escutcheon. Place spacer (9) in sink hole to insure no metal-to-metal contact with sink and faucet shank Place the escutcheon and gasket under faucet, hand tighten using escutcheon washers and nuts. Mount as shown above using the mounting bracket. Tighten mounting nut securely by hand, using wrench provided.
PAGE 8
6 7 8 2 1 Tighten one additional turn with wrench. Use a second wrench to ensure you do not over tighten the check valves. Repeat for other side. Apriete una vuelta adicional con una llave de herramientas. Utilice una segunda llave de herramientas para asegurar que no exceda apretar las válvulas de retención. Repita en el otro lado. 1 2 2 Faites un tour supplémentaire à l’aide d’une clé. Utilisez une deuxième clé pour éviter de serrer excessivement les clapets de non-retour.
PAGE 9
10 11 Side View Vista lateral Vue latérale 2 1 1 2 1 Wire must extend away from solenoid. Asegúrese que el alambre se extiende alejado del solenoide. Prenez soin de placer les fils à l’écart de l’électrovanne. 12 1 IMPORTANT For proper functionality DO NOT tie, twist or bunch the wires. Para un funcionamiento adecuado NO amarre, tuerza o agrupe los alambres. Pour que le répartiteur électronique fonctionne bien, ÉVITEZ de nouer, d’entortiller ou d’enrouler les fils. 9 91866 Rev.
PAGE 10
13 14 “AA” Batteries (Last up to 2 years) Pilas “AA” (Duran hasta 2 años) Piles « AA » (Durée utile de 2 ans) Proper Placement Meilleure solution 1 2 “C” Batteries (Last up to 5 years) Pilas “C” (Duran hasta 5 años) Piles « C » (durée utile de 5 ans) Important: Place batteries in holder, secure cap as shown. Lay on cabinet floor. Importante: Coloque las pilas en el soporte, fije el tapón se muestra. Colóquelo en el piso del gabinete como.
PAGE 11
1 2 4193-DST 9193-DST 9693-DST 9993-DST 1 1 3 2 1 Slide base plate over hose assembly, ensure tab on base plate tab (1) is in the rear of the faucet for proper contact. 2 Slide base plate over hose assembly, ensure tab on base plate tab (1) is in the rear of the faucet for proper contact. Slide base plate over hose assembly, ensure tab on base plate tab (1) is in the rear of the faucet for proper contact. 2 3 1 2 8 3 7 Insert D 4 Ensure parts are oriented as shown in Insert D.
PAGE 12
OPTIONAL ESCUTCHEON INSTALLATION INSTALACIÓN OPCIONAL DE UNA CHAPA INSTALLATION DE LA PLAQUE DE FINITION FACULTATIVE 1 2 3 2 6 3 4 8 4 5 5 Place the escutcheon and gasket under faucet, hand tighten using escutcheon washers and nuts. Mount as shown above using the mounting bracket. Position mounting nut by hand and then tighten with wrench provided. Set final position of faucet on deck. Then, using a Phillips screwdriver, securely tighten locking screws.
PAGE 13
7 8 Side View Vista lateral Vue latérale 1 9 2 CUSTOM FIT CONNECTIONS / CONEXIONES ESPECIALES / SPÉCIAUX TUYAUTERIE BRANCHEMENT Installer accepts the responsibility to cut supply tubing in a way that allows a leak-free joint to be created. Brizo is not responsible for tubing that is cut too short or cut in a way that will not allow for a leak-free joint. Must use RP50952 sleeves supplied with model and nuts included on supply lines. Tube cut must be straight.
PAGE 14
PLASTIC SLEEVE INSTALLATION / INSTALACIÓN DEL CASQUILLO PLÁSTICO / INSTALLATION DES MANCHONS EN PLASTIQUE 1 2 2 3 1 Do not install sleeve upside down. Ensure cut is straight. No instale la manga boca abajo. Asegúrese que el corte esté recto. N’installez pas le manchon à l’envers. Assurez-vous que la coupe est droite. Do not use RP51243 gasket (1) supplied with PEX tubing or brass ferrule (2) supplied with valve stops.
PAGE 15
LED Guide If LED is: Solid Blue - Solenoid valve is open, water temperature is less than 80°F (27°C). Solid Magenta - Solenoid valve is open, water temperature is between 80°F (27°C) and 110°F (43°C). Solid Red - Solenoid valve is open, water temperature is greater than 110°F (43°C). 3 3 red flashes before solenoid opens or closes - replace batteries. Guía del LED 1 Si el LED es: Azul sólido - La válvula solenoide está abierta, la temperatura del agua es menos de 27° C (27° C).
PAGE 16
Solenoid Troubleshooting Note: Normal operation of the faucet will turn off water flow if faucet is not touched for 4 minutes. 1. If your spout indicates three red flashes, replace the batteries. If the spout still indicates three red flashes, please replace the solenoid assembly**. (see manual bypass option below*) 2. If neither water or light indication are working properly, a. Check that all six batteries or inserted in the proper orientation. b. Replace your batteries c.