Operating Guide

ManualsBrandsDelta ManualsKitchenTrinsic Single-Handle Pull-Down Sprayer Kitchen Faucet with Spring Spout in Chrome

HIGH RISE PULL-DOWN KITCHEN WITH SPRING SPOUT

LLAVE DE AGUA CUELLO DE GANSO EXTRAÍBLE CON

SURTIDOR DE RESORTE

ROBINET À BEC COL DE CYGNE À RESSORT POUR ÉVIER

DE CUISINE

Model/Modelo/Modèle

TRINSIC

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

7/10/2018 Rev. F

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave

Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your

Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

Pour installer votre robinet

Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

92727

9659-DSTs

9659T-DSTs

To access additonal technical documents & product info, visit www.deltafaucet.com/p/Your-Model-Number-Here

(example: www.deltafaucet.com/p/9159T-DST)

Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.deltafaucet.

com/p/Your-Model-Number-Here (ejemplo: www.deltafaucet.com/p/9159T-DST)

Pour avoir accès à des documents techniques supplémentaires et à de l’information sur le produit, visitez www.delta-

faucet.com/p/Votre-numéro-de-modèle-ci (exemple : www.deltafaucet.com/p/9159T-DST)

www.deltafaucet.com

1-800-345-DELTA (3358)

customerservice@deltafaucet.com

3/32"

Summary of content (16 pages)

PAGE 1
92727 Model/Modelo/Modèle HIGH RISE PULL-DOWN KITCHEN WITH SPRING SPOUT LLAVE DE AGUA CUELLO DE GANSO EXTRAÍBLE CON SURTIDOR DE RESORTE ROBINET À BEC COL DE CYGNE À RESSORT POUR ÉVIER DE CUISINE TRINSIC® Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
® TRINIC Models/Modelos/Modèles 9659-DST & 9659T-DST RP79661p Kitchen Spout Assembly with Magnet Ensamble del Tubo de Salida Bec RP73000 Cartridge Assembly Ensamble del la Válvula Soupape RP79659p Sprayer Assembly Ensamble de Rociador Pulvérisateur RP90234 Retainer & O-Ring Funda y Anillo “O” Douille et Joint torique RP92539 Indicator Base Assembly and Gasket (9659T Only) Ensamble de la base con indicador y empaque (9659T Solamente) Base à voyant indicateur et joint (9659T Seulement) RP80523 Steel Weigh
PAGE 4
RP93410 Filter Filtro Filtre EP92546 Solenoid Assembly Ensamble de Solenoide Électrovanne For PC, SS, AR & KS finishes, order EP92546 For PL, MW, RB & SP finishes, order EP92546 Para acabados PC, SS, AR y KS, ordene EP92546 Para acabados PL, MW, RB y SP, ordene EP92546 RP13938 O-Ring (2) Anillo “O” (2) Joint torique (2) Pour les finis PC, SS, AR et KS, commandez EP92546 Pour les finis PL, MW, RB et SP, commandez EP92546 EP73954 9 Volt Power Supply (Accessory Order Only) Fuente de alimentación de 9 volti
PAGE 5
Touch2O® 9659T-DST 2 1 1 1 2 8 4 3 Insert D 7 2 2 Ensure parts are oriented as shown in Insert D. Ensure isolation feature (7) on bracket is in sink hole. Shank (8) must not touch edge of sink to ensure proper touch operation. 6 Ensure tab on base (6) is in sink hole. Asegúrese de que las piezas están orientadas como se muestra en la inserción D. Asegúrese de que la pieza de aislamiento (7) ubicada en el soporte esté en el orificio del fregadero.
PAGE 6
4 3 2 3 2 2 1 1 1 2 2 1 4 NOTE: If you determine the PEX supply tubing for this faucet is too long and must be shorter to create an acceptable installation, follow the instruction for Custom Fit Connections. Install the included check valves on both hot and cold water supplies. Secure nut to supply valve and hand tighten, then one additional turn with wrench.
PAGE 7
8 9 Side View Vista lateral Vue latérale Side View Vista lateral Vue latérale 1 2 1 2 1 10 11 2 1 1 Wire must extend away from solenoid. Asegúrese que el alambre se extiende alejado del solenoide. Prenez soin de placer les fils à l’écart de l’électrovanne. 7 92727 Rev.
PAGE 8
12 “AA” Batteries (Last up to 2 years) Pilas “AA” (Duran hasta 2 años) Piles « AA » (Durée utile de 2 ans) 1 IMPORTANT 2 “C” Batteries (Last up to 5 years) Pilas “C” (Duran hasta 5 años) Piles « C » (durée utile de 5 ans) Important: Place batteries in holder, secure cap as shown. For proper functionality DO NOT tie, twist or bunch the wires. Importante: Coloque las pilas en el soporte, fije el tapón se muestra. Para un funcionamiento adecuado NO amarre, tuerza o agrupe los alambres.
PAGE 9
2 1 9659-DST 2 1 2 1 1 4 3 3 3 OPTIONAL ESCUTCHEON INSTALLATION INSTALACIÓN OPCIONAL DE UNA CHAPA INSTALLATION DE LA PLAQUE DE FINITION FACULTATIVE 2 1 3 2 6 3 4 8 4 5 5 Place the escutcheon and gasket under faucet, hand tighten using escutcheon washers and nuts. Mount as shown above using the mounting bracket. Tighten mounting nut securely by hand, and then tighten with wrench provided. Then, using a Phillips screwdriver, tighten locking screws.
PAGE 10
3 4 5 1 2 Tighten one additional turn with wrench. Use a second wrench to ensure you do not over tighten the check valves. Repeat for other side. 1 Apriete una vuelta adicional con una llave de herramientas. Utilice una segunda llave de herramientas para asegurar que no exceda apretar las válvulas de retención. Repita en el otro lado. 2 2 Faites un tour supplémentaire à l’aide d’une clé. Utilisez une deuxième clé pour éviter de serrer excessivement les clapets de non-retour.
PAGE 11
CUSTOM FIT CONNECTIONS / CONEXIONES ESPECIALES / SPÉCIAUX TUYAUTERIE BRANCHEMENT Installer accepts the responsibility to cut supply tubing in a way that allows a leak-free joint to be created. Delta is not responsible for tubing that is cut too short or cut in a way that will not allow for a leak-free joint. Must use RP50952 sleeves supplied with model and nuts included on supply lines. Tube cut must be straight. See plastic sleeve installation found in RP50952 and included below for more information.
PAGE 12
LED Guide If LED is: Solid Blue - Solenoid valve is open, water temperature is less than 80°F (27°C). Solid Magenta - Solenoid valve is open, water temperature is between 80°F (27°C) and 110°F (43°C). Solid Red - Solenoid valve is open, water temperature is greater than 110°F (43°C). 8 3 3 red flashes before solenoid opens or closes - replace batteries. Guía del LED Si el LED es: Azul sólido - La válvula solenoide está abierta, la temperatura del agua es menos de 27° C (27° C).
PAGE 13
Solenoid Troubleshooting Note: Normal operation of the faucet will turn off water flow if faucet is not touched for 4 minutes. 1. If your spout indicates three red flashes, replace the batteries. If the spout still indicates three red flashes, please replace the solenoid assembly**. (see manual bypass option below*) 2. If neither water or light indication are working properly, a. Check that all six batteries or inserted in the proper orientation. b. Replace your batteries c.
PAGE 14
92727 Rev.
PAGE 15
92727 Rev.
PAGE 16
92727 Rev.