Specification

TECHNICAL DATA
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2012 LHMC, A Masco Company
CP5115
Garb Bars
Decorative Brab Bars
(76 mm)(531.2mm)
3"
(74 mm)
2-7/8"20-7/8"
MATERIALS: Grab bar is constructed using 1-1/4" diameter 20 gauge 304
stainless steel tubing. Decorative posts and trim rings are cast
in zinc. Trim rings are held in place using a friction fit. Meets
ADA and ANSI A117.1-2003 for form and load bearing
requirements.
INSTALLATION: Install grab bar with 3 - #10 x 2-1/2” flat head stainless steel
screws provided for each end wall flange. Slide cover flanges
over wall flanges and press firmly to complete installation.
OPTIONAL FASTENER INFORMATION:
Wall studs or Wood blocking is preferable behind all wall
surfaces. If wood blocking is not available, the following
fasteners are suggested: Non-Stud Wall anchor.
SPECIFICATION: Surface mounted assist bar shall be
model__________________________
(fill in model number) by Liberty Hardware Manufacturing
Corporation.
(Height)(Total Length)
B
(Post Base
Diameter)
CA
Alexandria
(76 mm)(531.2mm)
3"
(74 mm)
2-7/8"20-7/8"
Crestfield
(76 mm)(531.2mm)
3"
(74 mm)
2-7/8"20-7/8"
Greenwich
(76 mm)(531.2mm)
3"
(74 mm)
2-7/8"20-7/8"
Jamestown
(76 mm)(531.2mm)
3"
(74 mm)
2-7/8"20-7/8"
Providence
Collection
(80 mm)(544mm)
3-1/8"
(86.8 mm)
3-3/8"21-3/8"
Silverton
(73 mm)(533.2mm)
2-7/8"
(76 mm)
3"21"
Celise
(76 mm)(531.2mm)
3"
(74 mm)
2-7/8"20-7/8"
Elegance
(75 mm)(531.2mm)
2-15/16"
(74 mm)
2-7/8"20-7/8"
Windemere