Installation Guide

Inquiries: 140 Business Park Dr. • Winston-Salem, NC, USA 27107
1-800-542-3789
Read and follow these instructions carefully. Failure to follow these instructions could result in injury or property damage.
These installation instructions are for typical 1/2" drywall.
• For wood stud installation, use #6 x 1-1/4" wood screws.
Locate mounting hardware before discarding any packaging.
Mounting hardware packed in Red Bag.
A
2x
B
1x
C
1x
D
2x
E
1x
Phillips screw driver
tournevis Phillips
destornillador en cruz Phillips
Safety goggles
lunettes de sécurit
gafas de seguridad
Level
niveau
nivel
Pencil
crayon
lápiz
Allen wrench
clé Allen
llave Allen
masking / painters’ tape
ruban masque / ruban cache
Cinta adhesiva de papel / para pintor
G
4x
H
4x
J
2x
1A ) Fold template in half and secure template to wall with tape. 1B) Using a level to ensure that
template is properly aligned vertically and horizontally, secure the template to the wall with tape.
1C) Using a pencil, mark holes.
1C
1
1A
1B
Loosen set screws (L) from bottom of the post and fix both the posts of the assembled product to fit
over the wall mounting clips and tighten the set screws
4
A
2x
L
2x
Use screw driver to fix auger wall anchor (H) with wall.
Please note : These installation instructions are intended for typical 1/2-in. drywall and do not include
instructions for installing into wood, tile or stucco. When installing directly into woods studs,
use #6 1 1/4-in. woods screws.
2
H
4x
With mounting brackets (J) facing outward, attach provided screws (G) into installed anchors (H)
and tighten with a screw driver.
3
J
2x
G
4x
Mount the glass shelf assembly to assemble between the posts and sleeve (M). Using the allen
wrench, loosen the set screws (L) from the bottom of the both posts and attach both posts to
glass shelf assembly. Tighten set screw with allen wrench.
5
L
2x
M
2x
15/16"
[23.3 mm]
6 1/4"
[159.0 mm]
6 1/4"
[159.0 mm]
35032
Rev 06/06/2016