Installation Guide

ManualsBrandsDelta ManualsBathTesla 2-Handle Wall Mount Bathroom Faucet Trim Kit in Stainless (Valve Not Included)

Model/Modelo/Modèle

T3552LF-WL

Series/Series/Seria

Tesla

TWO HANDLE WALL MOUNTED LAVATORY

FAUCET TRIM

LLAVES DE AGUA - GRIFOS - DE DOS MANIJAS

PARA INSTALACIÓN EN LA PARED

ROBINETS MURAUX À DEUX MANETTES POUR

LAVABOMURAL POUR LAVABOS

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:

For easy installation of your Delta faucet

you will need:

・

READ ALL

the instructions completely before

beginning.

・

READ ALL

warnings, care and maintenance

information.

・

To complete the deck and valve rough-in prior to

installing this trim kit.

Para instalación fácil de su llave Delta

usted necesitará:

・

LEER TODAS

las instrucciones completamente

antes de empezar.

・

LEER TODAS

los avisos, cuidados, e información

de mantenimiento.

・

Para completar el borde y la instalación de válvulas

dentro de las paredes previa a la instalación de la

llave y sus accesorios.

Pour installer votre robinet Delta

facilement, vous devez:

・

LIRE TOUTES

les instructions avant de débuter.

・

LIRE TOUE LES

les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

・

Installez le corps du robinet et terminez le

pourtour du bain avant de poser les accessories

de nition.

www.deltafaucet.com

4/26/2016 Rev. C

85865

1/8" (3.17mm)

1/8" (3.17mm) 1/8" (3.17mm)

Rough-in R3500-WL required for installation

Rough-in R3500-WL necesario para la instalación

Rough-in R3500-WL requis pour l'installation

Summary of content (6 pages)

PAGE 1
TWO HANDLE WALL MOUNTED LAVATORY FAUCET TRIM 85865 LLAVES DE AGUA - GRIFOS - DE DOS MANIJAS PARA INSTALACIÓN EN LA PARED Model/Modelo/Modèle T3552LF-WL Series/Series/Seria TeslaTM ROBINETS MURAUX À DEUX MANETTES POUR LAVABOMURAL POUR LAVABOS Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
1 2 A. Figure 1 2 1 4 3 1 4 2 3 B. 1 2 3 Figure 2 1 1 C. 2 4 3 4 1 2 3 1 2 SPOUT FLANGE AND SPOUT INSTALLATION A. Pull off plasterguards (1) and discard them. HANDLE FLANGE INSTALLATION Install handle flange (1) and gasket (2). Secure with flange nut (3). Finished wall thickness can vary from 1/8 "to 1 1/8". If mounting sleeve (4) is extending from finished wall more than 3/8", install flange nut (3) as shown in figure 1.
PAGE 3
4 A. 3 2 1 Finished Wall 1 11/16"-1 3/4" (42.8 mm 44.4 mm) 1 B. 5 2 1 4 2 1 7 3 6 HANDLE INSTALLATION A. Install stem extender (1) onto the cartridge. Mark the stem extender (1) between 1 11/16" - 1 3/4" from finished wall; remove and cut if necessary. Reinstall stem extender (1). Select one of the 4 supplied screw (2) lengths. Screw must securely hold stem extender (1) in place. B. Make sure handle insert (1) and glide ring (2) are pressed into place in the handle (3).
PAGE 4
2 1 1 9 8 3 7 4 6 5 3 2 MAINTENANCE – VALVES MAINTENANCE – SPOUT MANTENIMIENTO – VÁLVULAS MANTENIMIENTO – SURTIDOR SHUT OFFWATER SUPPLIES BEFORE SERVICING VALVE OR SPOUT ASSEMBLIES. If your faucet leaks out of spout or around handle body, replace valve cartridge (1). A. Remove button (2) and set screw (3). Pull off handle (4). B. Remove screw (5) and stem extender (6). C. Remove flange nut (7)，flange and gasket (8). D. Remove mounting sleeve (9). E.
PAGE 5
▲ Specify Finish Especifíque el Acabado Précisez le Fini RP61828 O-Ring Anillo “O” Joint Torique RP61827 Spout Flange Nut Tuerca con arandela incorporada para el Surtidor RP78749▲ Flange and Gasket Borde y junta Bride et Joint RP75494 Spout Adapter Adaptador del Surtidor Adaptateur de bec RP78748▲ Handle Assembly (2) Conjunto de la manija (2) Montage de la manette (2) RP61821 Flange Nut (2) Tuerca con arandela incorporadas (2) Écrou à embases (2) RP61820 Stem Extender (2) Extensión para la Espiga (2)
PAGE 6
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.