Installation Guide

ManualsBrandsDelta ManualsBathroom Sink FaucetsT3599LF-BLWL

Model/Modelo/Modèle

T3599LF-WL

Series/Series/Seria

Pivotal

TWO HANDLE WALL MOUNTED LAVATORY

FAUCET TRIM

LLAVES DE AGUA - GRIFOS - DE DOS MANIJAS

PARA INSTALACIÓN EN LA PARED

ROBINETS MURAUX À DEUX MANETTES POUR

LAVABO

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:

For easy installation of your Delta faucet

you will need:

● To

READ ALL

the instructions completely before

beginning.

● To

READ ALL

warnings, care and maintenance

information.

● To complete the deck and valve rough-in prior to

installing this trim kit.

Para instalación fácil de su llave Delta

usted necesitará:

●

LEER TODAS

las instrucciones completamente

antes de empezar.

●

LEER TODAS

los avisos, cuidados, e información

de mantenimiento.

● Para completar el borde y la instalación de válvulas

dentro de las paredes previa a la instalación de la llave

y sus accesorios.

Pour installer votre robinet Delta

facilement, vous devez:

●

LIRE TOUTES

les instructions avant de débuter.

●

LIRE TOUE LES

les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

● Installez le corps du robinet et terminez le pourtour du

bain avant de poser les accessories de nition.

www.deltafaucet.com 04/04/2017 Rev. B

91205

Rough-in R3500-WL required for installation

Rough-in R3500-WL necesario para la instalación

Rough-in R3500-WL requis pour l'installation

1/8" (3.17mm)

Summary of content (6 pages)

PAGE 1
91205 Model/Modelo/Modèle T3599LF-WL Series/Series/Seria PivotalTM TWO HANDLE WALL MOUNTED LAVATORY FAUCET TRIM LLAVES DE AGUA - GRIFOS - DE DOS MANIJAS PARA INSTALACIÓN EN LA PARED ROBINETS MURAUX À DEUX MANETTES POUR LAVABO Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
A. 1 2 A. 3 1 1 B. 2 B. 1 2 2 3 SPOUT FLANGE AND SPOUT INSTALLATION FLUSH YOUR SYSTEM A. Install spout flange (1) and gasket (2). Option: If mounting surface A. Pull off plasterguards (1) and discard them. B. Turn on the water supplies to the valve body. Position a bucket in front of spout shank (2). Using pliers, slowly open the hot and cold valve, and allow the water to flow from the spout shank (2), for at least one minute. Close valves.
PAGE 3
Figure 1 4 1 5/8" (41 mm) Diameter Max. 2 A. 1 1 2 Finished Wall 3 1 7/16"-1 1/2" (36.5mm-38.1mm) 2 3 1 1 B. Figure 2 Red marking Marca de punto rojo Marquage rouge 2 1 2 3 1 2 3 4 5 Blue marking Marca de punto azul Marquage bleu 1 HANDLE INSTALLATION A. Install stem extender (1) onto the cartridge. Mark the stem (1) between 3 1 7/16" - 1 1/2" from finished wall; remove and cut if necessary. Reinstall stem extender (1). Select one of the 4 supplied screw (2) lengths.
PAGE 4
1 9 8 4 7 1 6 2 5 3 2 MAINTENANCE – VALVES MAINTENANCE – SPOUT SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE OR SPOUT ASSEMBLIES If your faucet leaks out of spout or around handle body, replace valve cartridge (1). A. Remove button (2) and set screw (3). Pull off handle (4). B. Remove screw (5) and stem extender (6). C. Remove sleeve (7), handle flange (8). D. Remove mounting sleeve (9). E. Unscrew cartridge (1) by turning it counterclockwise using a 19 mm hex socket wrench. F.
PAGE 5
RP84244 Spout Flange,Gasket and O-ring Reborde del Surtidor, Empaque y Anillo “O” Embase de bec, joint et Joint torique RP70600 O-rings Anillos “O” Joint toriques RP92251 Flange Nut and Flange (2) Tuerca con Reborde y Brida (2) Ecrou de l’embase et embase (2) RP92247▲ Spout Caño Bec RP76563-1.
PAGE 6
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.