Operating instructions

Page 15
GAS ENGINE DRIVEN ROLLER PUMP PLUMBING PARTS LIST
REF. PART
NO. NO. QTY DESCRIPTION
- C4101GE 1 Roller Pump w/3.5 HP Gas Engine
21. C4101 1 Roller Pump
22. GE3HP 1 3.5 HP Gas Engine (Horizontal Shaft)
23. 02660 1 Roller Pump Mounting Bracket
24. 04305 2 5/16"-18 UNC x 1/2" Hex Head Bolt
25. 00036 2 5/16" Lockwasher
26. 04055 4 1/4"-20 UNC x 1" Hex Head Bolt
27. 02772 4 1/4"-20 UNC Nylon Insert Locknuts
28. 02653 1 Pump Shaft Shield
29. 02990 1 5/16"-18 UNC x 1" Hex Head Bolt
30. 02802 5 5/16"-18 UNC Nylon Insert Locknut
31. 04880 1 Pump/Engine Coupler
32. 07174 4 1/4"-20 UNC x 3/4" Sq. Head Set Screw
33. 00372 4 5/16"-18 UNC x 1-1/2" Hex Head Bolt
34. 05034 1 6B1 Valve Mounting Plate
35. 8460 1 3/4" MPT Pressure Relief Valve
36. 6B1 1 3/4" FPT Direct - o - valve
- AB6B1 - Direct - o - valve Repair Kit (see pg. 23)
37. 160GB 1 160 lb. Brass Pressure Gauge
38. 00214 4 1/4" Flatwasher
39. A3438 1 3/4" MPT x 3/8" Hose Barb Fitting
40. 380RB - 3/8" I.D Rubber Hose
41. A1438 1 1/4" MGHT x 3/8" Hose Barb Fittinig
42. A1238 1 1/2" MPT x 3/8" Hose Barb Fitting
43. 30L22425 18 1 Spray Wand
44. 5500 18PP 1 Adjustable Tip (ordered separate)
45. 01872 2 Rubber Bumper
1. P55 23A 1 55 gallon Tank (incl. lid, agitation and
outlet fittings).
2. PL5A 1 5î cover for tank
3. 5044 - 1 1 Single Agitation Wand Assembly
4. M1200 1 1/2" MPT Short Nipple
5. BEL1212 1 1/2" MPT x 1/2" Hose Barb Elbow
6. B6H 6 3/8" Hose Clamp
7. 120RB - 1/2" I.D Rubber Hose
8. BEL3412 1 3/4" MPT x 1/2" Hose Barb Fitting
9. UV075FP 3 3/4" Poly Ball Valve
10. BM3400 6 3/4" Short Nipple
11. T34F 1 3/4" FPT x 3/4" Hose Barb Tee
12. B12H 8 3/4" Hose Clamp
13. 340RB - 3/4" I.D Rubber Hose
14. EL114 34 1 1-1/4" MPT x 3/4" Hose Barb Elbow
15. BEL3434 5 3/4" MPT x 3/4" Hose Barb Elbow
16. BTT34 2 3/4" FPT Tee
- RVF34 80 - 3/4" Line Strainer w/80 mesh screen
17. RVF34C 1 3/4" Strainer Cup
18. RVF34GV 1 Viton O-ring for 3/4" Strainer
19. RVF380 1 80 Mesh Screen for 3/4" Strainer
20. RVF34B 1 Strainer Bowl
REF. PART
NO. NO. QTY DESCRIPTION
PARTS LIST
OPERATING INSTRUCTIONS
1. Fill tank with water.
2. Open the valve in the pump intake line. (A)
3. Open the pressure relief valve. (C)
4. Open Direct - o - valve. (D)
5. Open the agitation valve. (B)
6. Start engine and run pump.
7. Slowly close the pressure relief valve (C) until the desired
spraying pressure is reached with the boom spraying.
8. If adequate spraying pressure cannot be reached, slowly close the
agitation valve until the desired spraying pressure is reached.
9. Check for leaks.
10. Follow recommendation for chemical mixing and handling.
NOTE: Contact local authorized Briggs and Stratton dealer for replacement gas engines and parts.
Model no. and type no. of engine required to order parts from your Briggs and Stratton dealer.
Please order replacement parts by PART NO. and DESCRIPTION.