Operating instructions
Page 8
SAFETY SIGN CARE
Keep safety signs clean and legible at all times.
Replace safety signs that are missing or have become illegible.
Replacement parts that displayed a safety sign should also display current sign.
Safety signs are available from your distributor, dealer parts department, or factory.
How to install safety signs:
Be sure that installation area is clean and dry.
Decide on exact position before you remove backing paper.
Remove smallest portion of split backing paper.
Align decal over specified area and carefully press small portion with
exposed sticky backing in place.
Slowly peel back remaining paper and carefully smooth decal into place.
Air pockets can be pierced with a pin and smoothed out using piece of backing paper.
BEFORE OPERATION:
Carefully study and understand this manual.
Do not wear loose-fitting clothing which may catch in moving parts.
Always wear protective clothing and substantial shoes.
It is recommended that suitable protective hearing and eye protection be worn.
The operator may come in contact with certain materials which may require specific safety
equipment relative to handling of such materials. (Examples: extremely dusty, molds,
fungus, bulk fertilizers, etc.)
Give sprayer a visual inspection for any loose bolts, worn parts, or cracked welds, and make
necessary repairs. Follow maintenance safety instructions included in this manual.
Be sure there are no tools lying on or in equipment
Do not use sprayer until you are sure that area is clear, especially around children and
animals.
Don't hurry learning process or take sprayer for granted. Ease into it and become familiar
with your new equipment.
Practice operation of your equipment and its attachments. Completely familiarize yourself
and other operators with its operation before using.
Use a tractor equipped with Roll Over Protection System (ROPS) and fasten your seat belt
prior to starting engine.
Manufacturer does not recommend usage of a tractor with ROPS removed.