Owner's Manual
27
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
The menu displayed depends on the input source and usage.
How to make detailed settings
Setting items Detailed items Description Page
Speaker Setup Speaker Config. Selects speaker configuration and size (bass reproduction capability).
C 5
Bass Setting Sets subwoofer and LFE signal range playback.
C 6
Distance Sets distance from listening position to speakers.
C 6
Channel Level Sets the volume of the test tone to be the same when it is output from each
speaker.
C 7
Crossover Freq. Sets the maximum frequency of the bass signal output from each channel to
the subwoofer.
C 8
Input Setup
Displayed items of the “Input Setup”
menu differs, depending on the selected
input source.
Input Assign Changes input connector assignment.
30
Auto Preset Uses the auto preset function to program radio stations.
31
Preset Skip Sets the preset memories that you do not want to display when tuning.
31
Video Source Video of another input source is played back combined with the playing audio.
31
Input Mode Sets the audio input mode and decode mode.
31
Source Level Adjusts the playback level of the audio input.
31
Option Setup Volume Sets the volume setting.
32
HDMI Makes settings for HDMI.
33
Other Makes various other settings.
33
Audio Adjust Adjusts surround sound parameters.
34
Tone Adjusts the tonal quality of the sound.
36
NIGHT MODE Optimized setting for late-night listening.
Compress dynamic range (difference between loud and soft sounds).
36
RESTORER Expands the lower and higher regions of compressed audio to enable richer
audio playback.
37
Audio Delay Compensates for incorrect timing between video and audio.
37
Speaker Setup
Input Setup
Option Setup
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Enter Return
SETUP MENU
ENTER
BACK
Items that only need to be set
once
Set these for example upon purchase.
Once these items are set, there is
no need to set them again unless
the speaker layout or the connected
speakers have been changed.
Basic version
Advanced version
Information
Advanced version
DVD