Owner's Manual

4
ENGLISHFRANÇAISESPAÑOLPORTUGUÊSESPAÑOLNEDERLANDSSVENSKA
Preparation PlaybackConnect Setup
Connect this unit to the television using an HDMI cable
(sold separately)
When a device supporting Deep Color signal transfer is connected, use a cable compatible
“High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.
HDMI IN
1
Turn the television and subwoofer power on, and
switch the video input to this unit (HDMI input)
For details on how to operate the television and subwoofer , see the television and subwoofer
instruction manual.
q Power on
w Power on
e Switch the input to this unit (HDMI input)
2
Insert the main unit power plug into the wall socket
To household power outlet
(AC 120 V, 60 Hz)
Power cord
3
Insert the provided batteries into the remote control unit
q Remove the rear lid in the direction of the
arrow and remove it.
w Load the two batteries properly as indicated by
the marks in the battery compartment.
R03/AAA
e Put the rear cover back on.
4
4
Turn on power to the unit
The power indicator fl ashes green and the power turns on.
POWER
QUICK SELECT
2134
Press POWER X
You can also switch the power to standby by
pressing X on the main unit.
5
Before setting up the speakers
1.AVR1513E3_ENG_IM_GS_00A_0214校了後修正.indd 4 2012/02/14 20:03:30