Owner's Manual

8
ENGLISHFRANÇAISESPAÑOLPORTUGUÊSESPAÑOLNEDERLANDSSVENSKA
Connect Preparation Setup
8
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Playback
1
Use ui to select “Crossover Freq.”,
and then press
ENTER.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Front
Center
Surround
Speaker Setup
Enter ReturnENTER
BACK
Front
Center
Surround
80Hz
80Hz
80Hz
1 Crossover Freq.
2
Use ui to select a speaker, and use
o p to select the frequency.
Front / Center / Surround
Specify crossover frequency for each
speaker.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz /
120Hz / 150Hz / 200Hz / 250Hz : Set the
crossover frequency.
• “Crossover Freq.” can be set when the “Bass
Setting” – “SW Mode” (vpage 6) setting
is “LFE+Main”, or when you have a speaker
that is set to “Small”.
• Always set the crossover frequency to “80Hz”.
When using small speakers, however, we
recommend setting the crossover frequency to
a higher frequency.
• For speakers set to “Small”, sound below the
crossover frequency is cut from the sound
output. The cut bass sound is output from the
subwoofer or front speakers.
• The “SW Mode” setting (vpage 6)
determines which speakers can be set.
• When “LPF for LFE” is selected, speakers set
to “Small” at “Speaker Confi g.” can be set. If
the speakers are set to “Large”, “Full Band”
is displayed and the setting cannot be made.
• If set to “LFE+Main”, this setting can be made
regardless of the speaker size.
3
Press ENTER to enter the setting.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Front
Center
Surround
Speaker Setup
4
Press SETUP.
The menu display disappears.
Playing a Blu-ray Disc player
This section explains the basic operations for surround playback using a Blu-ray
Disc player connected to this unit.
For details, see the included CD-ROM (Owner’s manual).
Crossover Freq.
Default settings are underlined.
1
Press Blu-ray to switch an input source for a player used for
playback.
MODESHIFT
BANDMEMORYCBL /SAT
Blu-ray
DVD
GAME
AUX
POWER
QUICK SELECT
2134
VOLUME
INFO
AUDIO
BACK SETUP
MUTETONERESTORERNIGHT
SURROUND AUDIO DELAY
ENTER
2
Play the component connected to this unit.
Make the necessary settings on the player (language setting, subtitles
setting, etc.) beforehand.
3
Adjust the sound volume.
VOLUME d/f ···················· Volume up /down
MUTE ················································Muting
4
Press SURROUND 0 or SURROUND 1 to select a listening
mode.
The listening mode is displayed on the display or TV screen.
• Each time
SURROUND 0 or SURROUND 1 is pressed, the listening mode is
switched. Select the desired listening mode.
When power is switched to standby
GConnecting a Blu-ray Disc playerH
OUT
HDMI
HDMI
cable
(sold separately)
Blu-ray Disc player
Press POWER X.
n Power indicator status in standby mode
• Power on : Green
• Normal standby : Off
• Standby when “Standby Pass” (vm page 33)
is not set to “OFF” : Red
NOTE
During power standby, a minimal amount of power is
consumed. To totally cut off the power, remove the
power cord from the power outlet.
Other operations
See the following items on the included CD-ROM (Owner’s manual).
n Playing a Blu-ray Disc player/DVD player
n Playing a portable player
n Tuning in radio stations
n Convenient functions
n How to make detailed settings
1.AVR1513E3_ENG_IM_GS_00A_0214校了後修正.indd 8 2012/02/14 20:03:33