Owner’s Manual / Safety Instructions / Compliance Information DSB-150 Bluetooth® Wireless Speaker System Français Système de haut-parleurs sans fil Bluetooth® Manuel de l’utilisateur / Instructions de sécurité / Informations sur la conformité Español Sistema de altavoces inalámbricos por Bluetooth® Manual del propietario/Instrucciones de seguridad /Información de cumplimiento DSB-150E3 CD-ROM 140411_Final.
FCC / IC Information nn FCC Information (For US customers) 1. IMPORTANT NOTICE:DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by Denon may void your authority, granted by the FCC, to use the product. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.
E N G L I S H Read these safety instructions before operating the unit. nn SAFETY PRECAUTIONS ATTENTION : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
E N G L I S H Introduction Thank you for choosing DENON® and congratulations on your purchase of the DSB-150 wireless speaker system. The DSB-150 is a self-amplified stereo speaker system that uses Bluetooth® wireless communication to receive a signal from any standard Bluetooth equipped device capable of stereo audio transmission (A2DP).
E N G L I S H Power Connection Attach the power plug adapter plate to the power supply. Plug the power supply into the wall power outlet. Connect the other cable from the power supply to the power input on the back of the unit. Service Connector The service port is used for software updates only. Reset Button Returns the DSB-150 settings to the defaults values. DSB-150, remote control, power supply and a power plug adapter Controls power – There are three power states.
E N G L I S H Volume Display DSB-150, remote control, power supply and a power plug adapter There is a 10-segment volume display on the front behind the grille. The display lights blue when volume adjustments arePower Button Bluetooth® Input Button made. After a few seconds the display turns off. When the system Input Button receives a signal from the remote control, the bottom LED Aux flickers.
E N G L I S H 3. The DSB-150 has two ways to initiate pairing: NFC (Near Field Communication) or “tap-to-pair”. The newest and easiest pairing method. If you have an NFC enabled device, simply place it gently on the top of the DSB-150. Your phone or tablet does the rest, and you can be playing audio within seconds. Press and hold the button on the top of the DSB-150, or on the remote, for 3 seconds. The button on the top will begin to flash blue, indicating that the system is looking for your device.
E N G L I S H Connecting Headphones Connect the headphone plug to the 3.5mm jack beside the symbol. This turns off the DSB-150 internal speakers. If your headphones have a larger 1/4-inch plug you will need an adapter, available at many retailers. Auxiliary Input Press the button on the top or on the remote control. The the top will light blue. button on The DSB-150 can accept an analog signal from a wide range of sources— from CD players to MP3 players, and even older legacy devices.
Register your product online @ www.denon.com www.denon.com Denon is registered trademark of D&M Holdings Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. © 2013 CSR plc and its group companies.