Preparation Connections Operation Troubleshooting . .
Contents Preparation Connections Operation Adjusting the volume Listening to music using a wired connection Voice Control Using Siri Conducting hands-free phone calls using Envaya 4 5 6 6 6 6 7 9 10 14 14 22 23 24 25 Troubleshooting Tips Troubleshooting Speaker does not turn on Envaya cannot be charged No sound from the speaker Sound is distorted, noisy, or cuts in and out Cannot pair a Bluetooth device with the speaker Speaker is turning off automatically Speaker is malfunctioning Cannot conduct a c
Contents Preparation Connections Operation Troubleshooting Appendix Playing back a Bluetooth device Precautions for Dust Resistance and Water Resistance Trademark information Specifications DSB50BT DSB150BT DSB250BT Index 33 33 34 35 35 37 39 41 3 Index Appendix
Contents Preparation Connections Operation Troubleshooting Introduction This manual is for all three models. For the purposes of this manual, the name “Envaya” is used to refer to the three products. Their respective model names are used in the model-specific manuals. DSB250BT (Envaya) DSB150BT (Envaya Mini) .
Contents Preparation Connections Operation Troubleshooting Unpacking Quick Start Guide Safety Instructions USB Cable (Micro B connector) . Strap 0 USB to AC power adapter not included.
Contents Preparation Connections Operation Troubleshooting Appendix Overview Sound Quality Operation 0 Despite the compact size of Envaya, powerful playback sound is 0 Hands-free phone calls can be conducted using Envaya by produced by using neodymium magnets in the magnetic circuit and utilizing an original surround shape in the passive radiator. pairing with a Bluetooth-compatible mobile phone.
Contents Preparation Connections Operation Troubleshooting Features and functions q . w A Microphone This microphone is used when conducting hands-free phone calls. (v p. 25) B Status Indicator Lit when power is on. Lit when charging. (v p. 12) Lit when pairing. (v p.
Contents Preparation e Operation Troubleshooting Appendix r w e r q . q w Connections . A Call button (T) Answers incoming calls and ends calls. (v p. 25) A Strap loop Attach the provided strap here. B Volume adjustment buttons (–,+) Adjusts the volume up and down. (v p. 22) B Cap Close this cap securely to ensure proper dustproof and waterproof performance. C Power button (X) Turns the power on/off. (v p. 14) D Bluetooth button (V) Press this to start pairing. (v p.
Contents Preparation Connections Operation Troubleshooting Appendix Attaching the Strap The strap can be attached more easily by using the twist tie that holds it in place. Loop the twist tie around the strap. 2 Pass the twist tie through the strap loop of this unit. 3 When the loop of the strap appears on the other side, insert both ends of the strap through the loop to secure it in place. . . 1 Tie the ends of the strap securely. . .
Contents Preparation Connections Operation Troubleshooting Appendix Charging Envaya can be charged and operated on battery power. It can also be operated from an AC power source by connecting it to the USB to AC power adapter (available commercially) using the supplied USB cable. Please make sure you charge the battery completely before listening on battery power. 0 After purchase, charge this unit before use.
Contents Preparation Connections Operation Troubleshooting o Charging the speaker A Open the cap on the rear side. B Connect the small end of USB cable to the speaker. C Connect the large end of the USB cable to a USB to AC power adapter and a power source. NOTE . 0 When connecting the dedicated charging cable to the charging port, be sure to match the cable connector with the shape of the socket. Forcing the connector into the socket will cause damage.
Contents Preparation Connections Operation o Battery indicator Troubleshooting Charging status (Approximate) The battery indicator uses 5 LEDs to indicate the status of the charge process when connected to the USB to AC power adapter. Appendix Status Indicator . 81 - 99 % . . 61 - 80 % When connected to the USB to AC power adapter (charging) 41 - 60 % . The battery indicator is always lit when charging. The battery indicator turns off when charging is complete. . 21 - 40 % .
Contents Preparation Connections Operation Troubleshooting Remaining battery (Approximate) When running on battery power Press and release the X button to check the remaining battery. The remaining battery level is displayed for approximately 2 seconds. Appendix Status Indicator 81 - 100 % . 0 When the battery indicator flashes on battery power, connect Envaya to the USB to AC power adapter. . 61 - 80 % . 41 - 60 % . 21 - 40 % . 7 - 20 % .
Contents Preparation Connections Operation Troubleshooting Turning the power on Turning the power off 1 1 Press and hold X until a notification sound is heard. The status indicator illuminates and Envaya turns on. Appendix Press and hold X until a notification sound is heard. The status indicator lights turn off and the speaker’s power is turned off. .
Contents Preparation Connections Operation Troubleshooting Appendix Bluetooth operation You can enjoy listening to music wirelessly by connecting Envaya to your Bluetooth device. Pairing Connecting Pairing (registration) is an operation that is required in order to connect a Bluetooth device to Envaya. When using Bluetooth for the first time, you need to pair Envaya and your Bluetooth device so they can communicate with each other. Envaya can store pairing information for up to 8 devices.
Contents Preparation Connections Operation 2 1: Connecting for the first time Turn on Bluetooth on your mobile device. 0 For details, see the Owner’s Manual of your Bluetooth device. 3 Bluetooth Bluetooth Press and hold X until a notification sound is heard. Press the V button. The status indicator blinks rapidly and Envaya enters pairing mode. CHOOSE Denon xxx . 16 Appendix The status indicator illuminates and Envaya turns on.
Contents 4 Preparation Connections Operation 5 Select “Denon Envaya xxx”*1 from the list of devices displayed on the screen of your Bluetooth device. When pairing is complete a notification sound is heard. Troubleshooting Appendix Listening to music. Music played back on the Bluetooth device will now play through your Envaya speaker. 0 Adjust the volume to an appropriate level. NOTE . 0 Envaya remains in the pairing mode for approximately 5 minutes and then will exit pairing mode.
Preparation Contents Connections Operation 3 2: Reconnecting paired devices 1 Troubleshooting Appendix Select “Denon Envaya xxx”*1 from the list of devices displayed on the screen of your Bluetooth device. Turn on Bluetooth on your mobile device. When a device is connected by Bluetooth, a notification sound is heard. 0 For details, see the Owner’s Manual of your Bluetooth device. Bluetooth Bluetooth CHOOSE . . Denon xxx 2 Press and hold X until a notification sound is heard.
Contents Preparation Connections Operation Troubleshooting Appendix o Switching playback devices Simultaneously connecting multiple Bluetooth devices (Multipoint function) 1 Two Bluetooth devices can be simultaneously connected to Envaya so you can easily switch between multiple Bluetooth audio sources without having to disconnect and reconnect each device. (“Bluetooth operation” (v p.
Contents Preparation Connections Operation Envaya Link (DSB50BT) Troubleshooting If you have two of the same speakers, you can use them as a pair of stereo speakers. 1 2 Connect the first Envaya to the Bluetooth device. Press and hold the Bluetooth buttons simultaneously on both Envayas for approximately 6 seconds. NOTE 0 Adjust the volume on the Bluetooth device. 0 Envaya Link is disconnected when the Envaya power is turned off. You need to reconnect Envaya Link in order to use it again.
Contents Preparation Connections Operation Envaya Link (DSB150BT/DSB250BT) Troubleshooting If you have two of the same speakers, you can use them as a pair of stereo speakers. 1 2 Connect the first Envaya to the Bluetooth device. Press and hold the Bluetooth buttons simultaneously on both Envayas for approximately 6 seconds. NOTE 0 When Envaya Link is connected, the volume of each Envaya is fixed to the maximum value. Adjust the volume on the Bluetooth device.
Contents Preparation Connections Operation Troubleshooting Adjusting the volume While playing music, press the + button to increase the volume. Press the – button to decrease the volume. 0 For the best signal to noise ratio, you may have to raise the volume of your connected music player up to an appropriate level then adjust the volume of the speaker up or down. .
Contents Preparation Connections Operation Listening to music using a wired connection 3 You can enjoy listening to music from devices that do not support Bluetooth audio by connecting to Envaya using a stereo mini plug cable (available commercially). 2 Appendix Start playing music from the device. You may need to adjust the volume up on the connected device, then adjust the volume on Envaya. Bluetooth connection takes priority on Envaya.
Contents Preparation Connections Operation Troubleshooting Voice Control Using Siri If the Bluetooth device is an iPhone or iPad (iOS device), you can use Siri to control Envaya. Press and hold the T button. Siri starts. . 1 2 Speak into the Envaya microphone. 0 iPhone, iPad and Siri are trademarks of Apple Inc., registered in the U.S. and other countries.
Contents Preparation Connections Operation Troubleshooting Appendix Conducting hands-free phone calls using Envaya o Answering an incoming call If your mobile phone supports the Hands-Free profile (HFP), you can answer incoming calls to your mobile phone from Envaya when the devices are connected by Bluetooth. If a mobile phone connected to Envaya receives an incoming call, the music being played is paused and Envaya plays a ring tone.
Contents Preparation Connections Operation Tips Troubleshooting Appendix Troubleshooting I want to answer incoming calls to my mobile phone on Envaya 27 Connecting multiple Bluetooth devices and switching easily between them 27 26 Speaker does not turn on 28 Envaya cannot be charged 28 No sound from the speaker 29 Sound is distorted, noisy, or cuts in and out 29 Cannot pair a Bluetooth device with the speaker 30 Speaker is turning off automatically 31 Speaker is malfunctioning 31
Contents Preparation Connections Operation Troubleshooting Appendix Tips I want to answer incoming calls to my mobile phone on Envaya 0 If a mobile phone connected by Bluetooth receives an incoming call, the music being played is paused and a ring tone plays. Press and release the T button on Envaya to answer the call. (v p.
Contents Preparation Connections Operation Troubleshooting Appendix Troubleshooting Check all connections. If Envaya does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase. z If you need additional help in solving problems, contact Denon customer service in your area. For more information, visit www.denon.com.
Contents Preparation Connections Operation Troubleshooting Appendix No sound from the speaker No sound from the speaker. 0 The speaker is not connected to USB to AC power adapter or the battery is not charged. Connect power and turn on the speaker. (v p. 14) 0 The volume is too low on your connected device. Turn up the volume on your device to about 90 % and then adjust the volume on the speaker. (v p. 22) 0 There is no connected Bluetooth device. Pair and connect a Bluetooth device and try again.
Contents Preparation Connections Operation Troubleshooting Appendix Cannot pair a Bluetooth device with the speaker Cannot pair a Bluetooth device with the speaker. 0 Power On the speaker then press the V button. Make sure your mobile device has Bluetooth On and select “Denon Envaya ***” from the list of Bluetooth devices. 0 The Bluetooth connection is experiencing wireless interference. Move the speaker away from appliances such as microwave ovens and other wireless devices.
Contents Preparation Connections Operation Troubleshooting Appendix Speaker is turning off automatically Speaker is turning off automatically. 0 To save battery power, the speaker is designed to turn off when no audio is played via Bluetooth for approximately 15 minutes. Power on the speaker by pressing and holding the power button for 2 seconds. (v p. 14) 0 If the input of Envaya is set to AUX for approximately 8 hours, Envaya automatically turns off.
Contents Preparation Connections Operation Troubleshooting Restarting the Envaya . To reset the speaker, turn on the speaker then, press and release the T, X and V button simultaneously. Envaya is reset. NOTE 0 The battery protection circuit activates after resetting. To restart this unit, charge the battery.
Contents Preparation Connections Operation Playing back a Bluetooth device Troubleshooting Appendix Precautions for Dust Resistance and Water Resistance Envaya supports the following Bluetooth profile. 0 A2DP (Advanced Audio Distribution Profile): When a Bluetooth device that supports this standard is connected, monaural and stereo sound data can be streamed at a high quality.
Contents Preparation Connections Operation Troubleshooting . Trademark information . The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. Qualcomm aptX is a product of Qualcomm Technologies International, Ltd.
Contents Preparation Connections Operation Troubleshooting Specifications DSB50BT o Speaker section Type: 40 mm full range × 2 40 × 83 mm passive radiator × 1 o Bluetooth section Communication system: Bluetooth Specification version 4.2 Compatible Bluetooth profiles: A2DP/AVRCP/HFP Supported codecs: aptX Low Latency/AAC/SBC Supported content protection: SCMS-T method o General Input 5 V I 2.1 A Power consumption (power off) 12 mW Battery Operating life 10 hours Charging time 2.
Contents Preparation Connections Operation Troubleshooting o Dimensions (Unit : mm) 163 56 .
Contents Preparation Connections Operation Troubleshooting DSB150BT o Speaker section Type: 40 mm full range × 2 40 × 83 mm passive radiator × 1 o Bluetooth section Communication system: Bluetooth Specification version 4.2 Compatible Bluetooth profiles: A2DP/AVRCP/HFP Supported codecs: aptX Low Latency/AAC/SBC Supported content protection: SCMS-T method o General Input 5 V I 2.1 A Power consumption (power off) 12 mW Battery Operating life 11 hours Charging time 3.
Contents Preparation Connections Operation Troubleshooting o Dimensions (Unit : mm) 187 63 .
Contents Preparation Connections Operation Troubleshooting DSB250BT o Speaker section Type: 40 mm full range × 2 53 × 135 mm passive radiator × 1 o Bluetooth section Communication system: Bluetooth Specification version 4.2 Compatible Bluetooth profiles: A2DP/AVRCP/HFP Supported codecs: aptX Low Latency/AAC/SBC Supported content protection: SCMS-T method o General Input 5 V I 2.1 A Power consumption (power off) 24 mW Battery Operating life 13 hours Charging time 3.
Contents Preparation Connections Operation Troubleshooting o Dimensions (Unit : mm) 209 74 .
Contents Preparation Index vA Accessories ..................................................... 5 AUX auto off function ..................................... 14 vC Charging ........................................................ 10 vF Features and functions ..................................... 7 vH Connections Operation vM Troubleshooting Appendix vT Multipoint function .......................................... 19 Troubleshooting .............................................
www.denon.com 42 D&M Holdings Inc.
