Instructions

57 Tuning/folder down

OPERATING INSTRUCTIONS

DAB radio

Press FM/DAB button to choose DAB Mode

If the system is switched on for the first time, it will automatically enter into the DAB mode

and perform an auto scan function. During the scan the display will show “Scanning …”

together with a slide bar that indicates the progress of the scan and the amount of stations

that have been found so far. Once the scan has finished, the radio will select the first

alphanumerically found station. You can now press the “PROG”button to explore the found

stations followed by pressing the button to select the station of your choice.

Phono Operation

1. Press the volume/power ON/OFF knob to turn the equipment on.

2. Use the function selector to select PHONO mode.

NOTE: Should your record stop before the last track finishes, set the auto stop control to

OFF. Your record will now play to the end, but you will have to stop the turntable rotation

manually. (Return the tone arm to its rest manually and if the turntable is still rotating, switch

off the unit via the volume control knob. Then set the auto stop control back to ON.)

Encoding

1. Set the function button to PHONO, CD, AUX or Cassette mode.

2. Press the record REC button one time to read the memory device, then the USB

or SD icon will flash on the LCD display,when set the function button to CD mode.

Press the record REC button two times to read the Memory device, then the

USB or SD icon will flash on the LCD display,when set the function button to

PHONO,AUX or Cassette mode.

3. Press the skip up or skip down button to select the desired mode (USB

or SD) for encoding/recording, then press the record REC button again to

confirm.