Operation Manual

- 15 -

Using Menus

How to use “YPbPr position” in YPbPr mode

When you enter “SET UP” menu, please operate according to the

following steps:

1.Press <▲ / ▼> to select “YPbPr position”(fig.1).

2.Press <◄ / ►> to enter the sub menu(fig.2).

This option allows you to adjust the position in YPbPr mode.

H Position

Adjust the screen horizontal position.

V Position

Adjust the screen vertical position.

Reset

Replace H position, V position with the factory default values.

How to use “PC position” in VGA mode

When you enter into “SET UP” menu, please operate according to

the following steps:

1.Press <▲ / ▼> to select “PC position”(fig.3).

2.Press <◄ / ►> to enter the sub menu (fig.4).

This option allows you to adjust the position in VGA mode.

Auto sync

Adjust screen settings automatically for optimized picture position.

Phase

Remove any horizontal interference.

Clock

Remove any vertical interference.

V Position

Adjust the screen vertical position.

H Position

Adjust the screen horizontal position.

Reset

Replace Phase, Clock, V position and H position with the factory

default values.

How to use “HDMI position” in HDMI mode

When you enter “SET UP” menu, please operate according to the

following steps:

1.Press <▲ / ▼> to select “HDMI position”(fig.5).

2.Press <◄ / ►> to enter the sub menu(fig.6).

This option allows you to adjust the position in HDMI mode.

H Position

Adjust the screen horizontal position.

V Position

Adjust the screen vertical position.

Reset

Replace H position, V position with the factory default values.