Operation Manual

- 3 -
Safety Instructions
To place
Place the TV on a horizontal, stable surface, do not block the ventilation holes, avoid placing the TV in direct sunshine,
or in high temperature, damp, dusty or causticity environment, otherwise the internal components will be damaged.
When you install the base-stand, be sure to install it according to the installation instruction strictly. The wall should
have enough loading strength to avoid falling and injury. In order to install safe and convenient, please connect the power,
antenna, VGA terminal first, then fix the TV set on the installed base-stand.
Power cord protection
Connect the AC power correctly, and ensure to ground perfectly, be careful not to damage the power cord, not place
it under a heavy object, not let it be spliced, worn out or knotted, not pull the power cord only when removing the power
plug.
! Precaution
* If and when anything abnormal occurs, turn off the power immediately, unplug the power
cord from the outlet and call the shop for repairing. Do not remove the back cover by
yourselves to avoid electrical shock. Let qualified technicians check and adjust your TV.
* When away for a long time, unplug the power plug.
* Do not plug or pull the power plug using wet hand.
* When you plug or pull the power plug, hold the isolation part of the plug, do not pull the
power cord.
* Do not drop or splash water on the TV set, do not put the container that is full of liquid on
the TV set in order to avoid electrical shock and so on.
* Do not put any objects or container that is full of liquid on the TV set, otherwise the
eyewinker or the liquid may leak into the TV set through the ventilation hole to cause
electrical leakage.
* Do not cover the cloth cover on the TV set in order to avoid the temperature rising too high
to cause damage.
* Do not press or touch the panel.
* Do not touch the antenna cable in lightening weather.
* Do not touch the terminal on the back cover when the TV is working.
* Do not connect the unsafe accessories to the TV set.
* Set up the antenna away from highways, power lines and neon signs.