Operation Manual

- 8 -
Basic Operation
All the functions can be conducted by pressing the keys on the remote control. For some functions you can also press
the buttons on the front panel of the TV set. Please check the table on Page 6 for details.
Power On/Off
1.Turn on the POWER button on the back cover, the TV is at STANDBY status, press <POWER> on the remote
control or < > on the control panel to turn on the TV. The power indicator is red at STANDBY status, it is green when
the TV is ON and has signal.
2.Press <POWER> on the remote control to switch between ON and STANDBY.
3.You can turn off the TV directly by pressing POWER button on the TV set.
To receive TV program
1.Press <MENU> to display the OSD main menu.
2.Press <◄ / ►> to select “SET UP”, press <ENTER>; Press <▲ / ▼> to select
“Auto tuning”, press <ENTER>.
3.Press <◄ / ►> to select a
corresponding Sound Mode, press
<ENTER> to start auto tuning. A brand
of tuning progress will be display on the
bottom side of the screen.
4.During searching, you can press the
<EXIT> to stop searching at any moment, and
return to the previous menu.
Tips: Before perform Auto tuning, you must select a country where you are by
selecting Country option in the FUNCTION menu.
The TV set begins to store the TV program from channel 0 automatically. After auto
tune, you can watch the TV programs one by one by pressing <CH->/<CH+>, or press
<-/--> and numeric keys to select the channel you want to watch.
To adjust volume
Press <VOL->/<VOL+> to decrease or increase the volume.
Mut
e
Press <MUTE>, the mute mark appears on the bottom left corner of the screen, it indicates the MUTE function is on,
the sound disappears; press <MUTE> again, the mark disappears, it indicates the MUTE function is off, the sound
recovers.
Return
Press < > to return to the last program.
Receiving the TV program by using number key
When you select the program number which is less than 10, press “-/--“ until the screen appears “ -“, then press the
numeric keys.
When you select the program number which is more than 10 (including 10), press “-/--“ until the screen appears “ --“,
then press the numeric keys.
When you select the program number which is more than 100 (including 100), press “-/--“ until the screen appears
“ ---“, then press the numeric keys (Max 199).