Operation Manual

PC
PC
PC
MOVE
SELECT
EXIT
AUTO CONFIG
COLOUR TEMP
PC
BRIGHTNESS
CLOCK
PHASE
CONTRAST
MOVE
SELECT
EXIT
PC
PC
H-POSITION
V-POSITION
OSD
H-POSITION
DURATION
LANGUAGE ENGLISH
PC
PC
MOVE
SELECT
EXIT
HALFTONE
V-POSITION
OSD SIZE 2 TIMES
SETUP
TXT LANGUAGE WEST
PC
PC
MOVE
SELECT
EXIT
NOISE REDUCE
BLUE SCREEN
ON
OFF
OSD MENU
You can choose the language, adjust the H-position,
V-position, duration 1 halftone and size..
NOTE:
If the set is cold ,there may be a small¡°flicker¡± when the set is switched on. It is normal, There is nothing
wrong with the set.
If possible, use the VESA 1024X768@60HZ video mode to obtain the best image quality for your LCD monitor.
Under other resolutions some scaled or processed pictures may appear on the screen.
Some dot defects may appear on the screen, like red, green or blue Spots, However,this will have no impact
oreffect on the monitor performance.
Do not press the LCD screen with your finger for a long time as it may incur some damage to the screen.
MENU SCREENS
14
SETUP MENU
TXT LANGUAGE.You can choose the supported
teletext fonts among AUTO,WEST,EAST,RUSSIAN,
ARABIC and FARSI.
NOISE DURACE: You can set the noirse filter to ON or OFF.
BULE SCREEN: You can set background ON or OFF.
You can set the picture display mode 16:9,
4:3 ,ZOOM1,and 16:9FS,PANORAMA.
PC MENU(under PC mode only)
You can adjust the CONTRAST, BRIGHTNESS
H-POSITION/V-POSITION: Press the VOL+/- buttons to adjust the picture Horizontal and Vertical position.
CLOCK : Press the VOL+/- to minimize any vertical bars or stripes visible on the screen background.
PHASE : When necessary, adjust the pixel phase of the picture to avoid picture interference.
AUTO CONFIG : To adjust the screen position automatically. It will take a few seconds and during this
process the screen will be black.
COLOUR TEMP: To ADJUST the PC mode color temperature.