Instructions / Assembly

lightly tap wall anchors
into holes flush to surface
step 2
note:
each shutter pair has it's own fasteners package; 8 each
=
space as desired
=
step 1
hold shutter in desired location &
drill 4 mounting holes for each
shutter with
1/4" bit
shutter
fasteners
Installation Instructions, Shutter
step 3
install screws
Drilling, s
awing, sanding or machining wood products generates wood dust, a substance known to the State of California to cause cancer. Use a respirator or
other safeguards to avoid inhaling wood dust. For more information, go to www.P65Warnings.ca.gov. Questions regarding products or installation please
contact us at [phone] or by emailing [e-mail]. Copyright © 2020 Design Craft Millworks. All Rights Reserved. Design Craft
Millworks is a REMBiR Family Company │3933 Leon Road, Suite 302 │Garland, TX 75041