Installation Guide
S
EVES
G
LASS
B
LOCK
RGF I
NDUSTRIES
, I
NC
.
(412) 449-0044
“L” cross: to be used at the corners of the wall
“T” cross: to be used on the perimeter of the wall (except the corners of the wall)
“+” cross: to be used between the glass blocks (except the perimeter and the corners)
“L ” cross
“T ” cross
“+” cross
No. of crosses needed for
5 block x 5 block project framed on four sides:
36 pcs.
No. of profiles needed for
5 block x 5 block project framed on four sides:
60 pcs.
profile
VetroQUICK is a dry installation system for creating glass block walls simply, quickly and
safely. VetroQUICK simplifies installation with the use of a few accessories: A Profile and
a Cross Connector.
Accessories:
Prepare the cross connector for use in different locations of the wall
IMPORTANT:
Please read before beginning installation.
VetroQUICK is not approved for use in projects requiring safety glazing. The user is responsible for determining if their project needs to meet safety
glazing specifications
See Notes & Recommendations Section at end of installation instructions before starting your project.
It is very important that the opening in which your glass block project will be installed is plumb and level.
Watch the “How-To” video at www.VetroQuick.com.
LEG (use for making
cross connectors)