User guide

APPENDICES Protocol Plus Owner’s Manual
50 Version 2
Copyright © 2010 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
8.1.5. Control Page Default Values
Menu Item
Display
Default
Range
Setting
Cycle Time
Control Cycle
Time
1
1 to 60 seconds
High limit setpoint
Control Hi-Lim
SP
Max
HiLimSP
MinHiLimSP – MaxHiLimSP
24
High limit band
Control Hi-Lim
Band
Off
Off, 3°C to 11°C (5°F to 20°F)
Power fail recovery
Control PwrFRec
Stop
Stop, Restart, Hold, Resume
Recovery time limit
Control
PwrFTime
00m00s
00m00s to 99m59s
Powerup start
enable
Control EPwrStrt
Dis
Dis, En
Powerup Start
Mode
Control StrtMode
Off
Off, Manual, Timer, Pro-1 to
Pro-8
Hysteresis
Control Hyst
3°C
1°C to 56°C (1°F to 100°F)
Process out low
Control RetOutLo
80°C
-73°C to 760°C (-100°F to
1400°F)
Process out high
Control RetOutHi
400°C
-73°C to 760°C (-100°F to
1400°F)
Time scale
Control
TimeScale
hh:mm
hh:mm or mm:ss
Key press beep
Control KeyBeep
On
On or Off
End of cycle beep
Control EOCBeep
Off
On or Off
Alarm beep
Control
AlarmBeep
Off
On or Off
8.1.6. Communication (Optional) Page Default Values
Menu Item
Display
Default
Range
Setting
Address
Communication
CommAddr
1
1 to 247
Mode
Communication
CommMode
OFF
OFF, Modbus
Baud rate
Communication Baud
Rate
19.2K
2400, 4800,
9600, 19.2K,
38.4K
Parity
Communication Parity
None
None, Odd, Even
24
See Enable Page (5.6.11)