User Manual

Stackable LCC/LCD Oven Owner’s Manual ASSEMBLY & SETUP
Version 1.1 21
Copyright © 2012 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
4. Assembly & Setup
Assembly and Setup provides directions for unpacking and installing your LCC/LCD.
4.1. Unpack & Inspect The LCC/LCD Oven
Remove all packing materials and thoroughly inspect the oven for any damage that might have
occurred during shipment.
 Note whether the carton and plastic cover sheet inside carton are still in good condition
 Observe all outside surfaces and corners of the oven for scratches and dents
 Check oven controls and indicators for normal movement, bent shafts, cracks, chips or
missing parts such as knobs and lenses
 Check the door and latch for smooth operation (Figure 5)
 Check the filter carton for damage
Warning!
The LCC door requires a Manual Override Key for use when
power is OFF. The door and panel that require a tool to open are
part of the safety system of the Stackable LCC/LCD Oven. Do
not attempt to permanently mount the Manual Override Key.

Do not remove torx screw from door release mechanism. Manual
Override Key cannot be permanently mounted.
Figure 5. Door Lock Manual Override Key (LCC/LCD/LLC/LLD).