User Manual

ASSEMBLY & SETUP Stackable LCC/LCD Oven Owner’s Manual

34 Version 1.1

means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and

retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.

24 hours

Process

Temperature

Option 1

Option 2

48 hours

Temperature Ramp 1.7°C/min up

to 5°C/Min

Temperature

Ramp 1.7°C/

min

3. Start the fan after making the electrical power connections.

4. Energize the equipment heater.

a. Use enough fresh air (or N2) to remove the smoke, while still being able to achieve and

maintain the necessary temperature.

b. The completion of the burn-off period should be based on the particle level in the oven or

smoke-free exhaust and minimal odor level.

c. Check the filter hold-down nuts after burn-off and tightened as necessary.

d. For best oven particle control, this step should be repeated on a regular basis.



If the equipment must be moved after the burn-off process, use

considerable care.

 The binder which strengthened new filters is now burned-off

and the media is very fragile.

 Rough handling of either the filter alone or the equipment

with the filter installed is not recommended as it may tear the

media and lead to reduced filter efficiency.

 Removal of the filter after heating can also result in damage

to the frame seal, and is only recommended when replacing

the filter.

Figure 14. Options for starting high-temperature HEPA Filters