User Manual

Stackable LCC/LCD Oven Owner’s Manual OPERATION
Version 1.1 37
Copyright © 2012 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
DISCONNECT
SWITCH
POWER Switch
DOOR RELEASE
• Check line voltage. Voltage must correspond to nameplate requirements of motors and
controls. A wrong voltage can result in serious damage. Refer to Section 1.5.4 for more
information.
• Check fresh air and exhaust openings. Do not be careless about restrictions in and around the
fresh air and exhaust openings and stacks. Under no condition can they be permitted to
become so filled with dirt that they reduce airflow.
Warning!
Do not use flammable solvent or other flammable material in this
oven. Do not process closed containers of any substance or
liquid in this oven because they may explode under heat.
5.3. Operating Procedure
5.3.1. Start Oven
1. Turn the yellow/red DISCONNECT
SWITCH to ON.
2. Press the POWER to ON.
a. The DOOR RELEASE pushbutton
will illuminate. This means the
door can be opened.
b. For Optional Beacon Light-equipped Units Only: The amber (center) beacon light will
illuminate, indicating that the oven is ready to receive work to be processed.
3. To open the oven door, press DOOR RELEASE while simultaneously pressing on the door.
The oven door will unlatch and open.
4. The heater is wired in series with the door switch. The door must be completely closed and
locked to activate the heater.

During the process cycle, DOOR
RELEASE will not be lit, meaning
that the oven door may not be
opened.
Figure 15. Power the Oven.