User Manual

ManualsBrandsDet-Tronics ManualsEquipmentEQ3000 Eagle Quantum Premier (V1.0)

DESCRIPTION

The Eagle Quantum

™

Premier Controller is a micropro-

cessor based module that performs all the communica-

tion and control functions for the fire and gas system.

The controller is approved as an annunciation and

releasing device for fire alarm systems.

The Local Operating Network/Signaling Line Circuit

(LON/SLC), through which all field devices communi-

cate, starts and ends its loop at the Controller. The

Controller continuously monitors the field devices on the

LON/SLC and performs the logic functions needed to

generate the appropriate output(s).

The Controller performs both static and user pro-

grammable logic operations. Static logic activates built-

in annunciation circuits, consisting of both visible and

audible alarms, per ANSI NFPA 72.

Programmable logic allows the Controller to be cus-

tomized to perform a variety of complex logic opera-

tions. Using Det-Tronics Safety System Software (S

the Controller can be programmed to implement any

cross-zone monitoring, voting, or timed operations that

might be needed in a fire suppression system.

The Controller is used in conjunction with Det-Tronics

software to configure the system as well as to provide

information on an ongoing basis to external systems

such as PLCs and DCSs. A dedicated RS-232 serial

port is provided for system configuration. The Controller

also has an RS-485 port that communicates using the

MODBUS RTU protocol. An optional dual media

ControlNet

™

board is available and provides Allen

Bradley compatibility.

The Controller features an on-board audible alarm for

local notification, as well as 12 LEDs for indicating sys-

tem status conditions. A vacuum fluorescent text dis-

play indicates the current status of the system, including

address, tag number and device status. In addition, the

Controller generates the heartbeat signal that tests for

LON/SLC integrity, provides time and date information

to field devices, and monitors for the presence of all

configured field devices.

FEATURES

• Approved annunciation and releasing device per

NFPA 72

• Meets FM/CSA guidelines as an approved gas system

• Programmable logic

• Two electrically isolated serial ports

• Transformer isolation of network ports

• Utilizes MODBUS and Allen Bradley ControlNet protocols

• ControlNet interface (optional)

• Safety System Software (S

)

• Eight programmable relay outputs

• Eight digital inputs

• Enhanced display and control functions

• Four-line, 20 character alphanumeric display

• LED status indicators

• Fault tolerant communication loop

• Extensive built-in diagnostics

• Real time clock

• Supports up to 246 field devices

• FM/CSA/CE/CENELEC

SPECIFICATION DATA

Eagle Quantum

™

Premier Controller

EQ300X

DET-TRONICS

Summary of content (2 pages)

PAGE 1
DET-TRONICS ® SPECIFICATION DATA Eagle Quantum™ Premier Controller EQ300X DESCRIPTION The Eagle Quantum™ Premier Controller is a microprocessor based module that performs all the communication and control functions for the fire and gas system. The controller is approved as an annunciation and releasing device for fire alarm systems. The Local Operating Network/Signaling Line Circuit (LON/SLC), through which all field devices communicate, starts and ends its loop at the Controller.
PAGE 2
SPECIFICATIONS UNSUPERVISED DIGITAL INPUTS (8 Channels)— Two state input (on/off). INPUT VOLTAGE— 24 vdc nominal, 18 to 30 vdc. 10% overvoltage will not cause damage to the equipment. POWER REQUIREMENTS— 9 watts nominal, 12 watts maximum. I/O PORTS— The Controller provides two electrically isolated serial ports, which can be active simultaneously. Port 1 is a RS-232 port used for system configuration. Port 2 is a RS-485 port that supports MODBUS RTU protocol.