Full Product Manual

OPERATION – BEFORE TURNING KEY AND PULL STARTING ENGINE
CLEAR AREA OF ALL PEOPLE AND PROPERTY THAT COULD BE DAMAGED.
THINK SAFETY. CHIPS ARE FLYING PROJECTILES AND CAN CAUSE INJURY.
CHECK BOTH CHUTES AND MAKE SURE THEY ARE CLOSED AND LOCKED.
WEAR SAFETY GLASSES, HEARING PROTECTION, AND GLOVES
IF YOUR UNIT WILL NOT START –
1. CHECK ALL WHITE WIRE CONNECTIONS
2. CHECK KEY SWITCH IS TURNED TO THE ON – RIGHT HAND POSITION.
3. ALSO UNPLUG THE WHITE CONNECTOR FROM SWITCH AND TRY IT.
• DO NOT WEAR LOOSE FITTING CLOTHES THAT COULD GET STUCK IN THE
CHIPPER
• ONLY CHIP WOOD, NO METAL OR PLASTIC.
• CHILDREN SHOULD NOT RUN THIS EQUIPMENT
• STAY ALERT OF YOUR SURROUNDING AND PERSONS THAT COULD
APEAR IN THE CHIP PATH WHILE YOU ARE WORKING.
• FEED LARGE DIA TREES SLOWLY INTO THE CUTTING DRUM ALLOWING
THE DRUM TO REGAIN RPM AND CUTTING SPEED BETWEEN CUTS.
RUN ALL CONTENTS IN THE HOPPER THROUGH THE MACHINE BEFORE
SHUTTING ENGINE OFF TO PREVENT LOOSE WOOD FROM LOGING
BETWEEN BLADES JAMMING DRUM BEFORE YOUR NEXT ENGINE START UP.
REMOVE SMALL SIDE COVER WITH 2 NUTS AND TURN DRUM
COUNTERCLOCKWISE TO FREE UP WOOD STUCK IN THE BLADE.
NEVER RUN CHIPPER WITH CHUTES OPEN. RUNNING A MACHINE WITH
CHUTES OPEN CAN CAUSE INJURY OR DEATH.
READ AND OBEY ALL WARNING LABELS ON THIS MACHINE.
TOW THE MACHINE 25 MPH MAX.