Manual

3.13 SPARE PARTS LIST
613-010000-000 Sensor rain shield
613-120000-000 Sensor splash guard
943-000006-132 Threaded Calibration Adapter
399-602016-000 LEL sensor housing assembly with plug-in detector included
612-820000-000 LEL sensor housing assembly (plug-in detector, PN370-201600-000, not included)
370-201600-000 Sensor: field replaceable plug in detector
925-525400-100 FP-524C Plug-in control circuit
500-005065-007 Connector board
327-000000-000 Programming Magnet
897-850800-000 3-port enclosure less cover
897-850700-000 Enclosure glass lens cover
960-202200-000 Condensation prevention packet (replace annually).
3.14 WARRANTY
Detcon, Inc., as manufacturer, warrants each LEL plug-in sensor element (part no. 370-201600-000), for a two year
period under the conditions described as follows: The warranty period begins on the date of shipment to the origi-
nal purchaser and ends two years thereafter. The sensor element is warranted to be free from defects in material and
workmanship. Should any sensor fail to perform in accordance with published specifications within the warranty
period, return the defective part to Detcon, Inc., 3200 A-1 Research Forest Dr., The Woodlands, Texas 77381, for
necessary repairs or replacement.
3.15 SERVICE POLICY
Detcon, Inc., as manufacturer, warrants under intended normal use each new MicroSafe™ plug-in control circuit to
be free from defects in material and workmanship for a period of two years from the date of shipment to the origi-
nal purchaser. Detcon, Inc., further provides for a five year fixed fee service policy wherein any failed transmitter
shall be repaired or replaced as is deemed necessary by Detcon, Inc., for a fixed fee of $55.00. The fixed fee service
policy shall affect any factory repair for the period following the two year warranty and shall end five years after
expiration of the warranty. All warranties and service policies are FOB the Detcon facility located in The
Woodlands, Texas.
Model FP-524C Combustible Gas Sensor PG.20
Spash Guard
Rain Shield
Enclosure less cover
Connector Board
Calibration Adapter
Enclosure glass lens cover
Plug-in control circuit
Sensor: field replaceable plug-in detector
LEL Main Sensor Housing Assembly
Programming Magnet
Condensation
Prevention Packet
(replace annually)
Figure #7