Owner's manual

Verifythatthedeviceorderedisthecorrectmodelforthedoorapplication.Inspectpackagefor
possibleshippingdamages.Carefullycuttapeandopencardboardshippingbox.Packedinto
thisboxyouwilltypicallyndarmassembly,doordecal(s),completelowenergyoperatorand
instructiondocuments.Removeitemsandplacethemcarefullyasidesotheywillnotbedamaged
orlost.Usinga#2Phillips,removethecoverscrewsandliftcover.Removepackingandinspect
allitemsbeforecontinuing.
Receiving Inspection
Contact Factory on damages and missing equipment
Installation Preparation
ThehangerbracketassemblyisuniquetotheDetexLowEnergyAutomaticDoorOperator.It
allowstheinstallationtobeperformedbyoneperson,quicklyandefciently.
LocatePhillipsscrewsinsideatthetopcorners.Removethese(screwswillbeusedagain)and
separatetheenclosurefromthehangerplate.
104851Page3
HangerPlate
DetexPart#-12515-X
REMOVE THESE TWO SCREWS
AND KEEP TO BE USED AGAIN
3-Position
Switch
Assy
(105422)
UDC 1000
Controller
(105421)
Line
Filter
(105416-2)
Gear
Motor
(104796-X)