Owner's manual

104851Page8
Button Location
Locatethebuttonssecurelytoawallorpost.Besurethebuttonisnotblockedbyopeneddooror
causetheusertobeinthepathofthedoorleafwhenopening.Checklocalcodesforvariationsin
locationrequirements.
Anotherpopulartypeofbuttonhasbattery-operatedtransmitters.Theyworkwithareceiver
mountedinoperatorcase.ThereceivermaybeconnectedtotheControlModuleforasourceof
power.Connectpowerwiresto#12and#13forA.C.,or#1and#11forD.C.Connectthe“COM”
and“N.O.”outputstoterminals#1and#2ofthecontrolmodule.
Eachtransmittersettingmustbeprogrammedtothesamesettingofthereceivertooperate
correctly.
PerANSI/BHMAA156.19,switchistobeinstalledwithinviewofdooratamaximumdistanceof
144”(3658mm)fromthecenterofthedoorandmountedaminimumof36”(914mm)anda
maximum48”(1219mm)fromthenishedoor.