Cut Sheet

www.powers.com
30
Powder ActuAted
FASTENERS
TECH MANUAL – POWDER ACTUATED ©2016 POWERS – REV. B
faStenerS
threAded studs
Product descriPtion
Threaded studs are available in 1/4"-20 and 3/8"-16 thread diameters with a variety of thread and shank lengths for use in concrete,
some types of concrete block, and A36 or A572 structural steel. They are used for applications where it may be desirable to remove the
fixture, where shimming may be required or for suspending sprinkler systems.
The shank diameter for the threaded studs is 0.145" for the 1/4"-20 diameter and 0.205" for the 3/8"-16 diameter. Both sizes have a
specially designed point to allow proper penetration into the base material. Knurled shank designs are available to increase performance
in steel base materials. A plastic flute is mounted over the point to retain the drive pin in the fasteners guide of the tool providing
guidance during the driving operation. On the 1/4"-20 threaded studs a plastic cap is also provided to protect the threads of the fastener
during the driving process as well as providing guidance during installation.
FAsteners size
1/4"-20 Threaded Studs
Cat.No.
Thread
Length
Shank Length Shank Dia. Standard Box Std. Carton Wt./100
50322-PWR 3/4" 1/2" (K) 0.145" 100 1,000 1.1
50326-PWR 3/4" 3/4" 0.145" 100 1,000 1.2
50328-PWR 1/2" 1" 0.145" 100 1,000 1.2
50330-PWR 3/4" 1" 0.145" 100 1,000 1.4
50336-PWR 3/4" 1-1/4" 0.145" 100 1,000 1.5
(K) = knurled
3/8"-16 Threaded Studs
Cat.No.
Thread
Length
Shank Length Shank Dia. Standard Box Std. Carton Wt./100
50340-PWR 1-1/4" 3/4" (K) 0.205" 100 1,000 3.6
50342-PWR 1-1/4" 1" 0.205" 100 1,000 3.8
50344-PWR 1-1/4" 1-1/4" 0.205" 100 1,000 3.8
(K) = knurled
rod hAngers
Product descriPtion
Rod Hangers and Post-Nut hangers for suspending electrical metal tubing (EMT), mechanical and electrical components from concrete
and steel. Rod Hangers and Post-Nut Clip accept either 1/4" or 3/8" threaded rod.
Spiral CSI and 8mm Head Drive Pins with Rod Hanger Clip
Catalog
Number
Description
Shank
Diameter
Standard
Box
Standard
Carton
50215-PWR 32mm (1-1/4") Spiral CSI Pin with 1/4"-20 Rod Hanger 0.157" 100 1,000
50219-PWR 32mm (1-1/4") Pin with 1/4"-20 Rod Hanger 0.145" 100 1,000
50221-PWR 32mm (1-1/4") Pin with 3/8"-16 Rod Hanger 0.145" 100 1,000
.300 Head Drive Pins with Post Nut Rod Hanger Clip
Catalog
Number
Description
Shank
Diameter
Standard
Box
Standard
Carton
50376-PWR
1-1/8" (29mm) Head Pin with Domed Right
Angle Clip Rod Hanger
0.145" 100 1,000
50378-PWR
1-1/4" (32mm) Head Pin with Domed Right
Angle Clip Rod Hanger
0.145" 100 1,000