Operation Manual

20
ENGLISH
NAILER D51256/D51275
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical data
D51256 D51275
Sound pressure (L
pA
) dB(A) < 82 < 82
Acoustic power (L
WA
) dB(A) < 95 < 95
Hand/arm weighted
vibration m/s
2
2.7 2.7
Recommended operating
pressure bar 4.9 - 8.3 4.9 - 8.3
Max. operating pressure bar 8.3 8.3
Air consumption per shot l 4.5 6.0
(at 6.9 bar) (at 6.9 bar)
Actuating mode contact contact
actuating actuating
Magazine angle 0° 34°
Fasteners
length mm 32 - 65 32 - 65
shank diameter mm 1.6 1.8
(16 gauge) (15 gauge)
angle 0° 34°
Weight kg 1.77 1.75
1)
This value is a tool-related characteristic value and
does not represent the influence to the hand-arm-
system when using the tool. The influence to the
hand-arm-system when using the tool will for example
depend on the gripping force, the contact pressure
force, the working direction, the adjustment of energy
supply, the workpiece and the workpiece support.
EC-Declaration of conformity
D51256/D51275
DEWALT declares that these tools have been designed
in compliance with:
98/37/EC, EN 792-13, EN 12549, EN 12096
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
Safety instructions
When using tools, always observe the safety
regulations applicable in your country to reduce
the risk of personal injury. Read the following
safety instructions before attempting to operate
this product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose tools to humidity. Keep work area
well lit. Do not use tools in the presence of
flammable liquids or gases.
3 Keep children away
Do not let children or visitors come into contact
with the tool. Supervision is required for those
under 16 years of age.
4 Store idle tools
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
5 Dress properly
Do not wear loose clothing or jewellery. They can
be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
6 Do not overreach
Keep proper footing and balance at all times.
7 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
D51256.P65 28-12-2001, 09:2120