User Guide

Intended Use
This heavy duty threaded rod cutter is designed for professional
applications.
DO NOT operate or use under wet conditions or in the presence of
flammable liquids or gases.
DO NOT use for cutting tempered bolts, threads of different sizes, or
reinforcing rod.
RECOMMENDED APPLICATIONS
Rod Size Thread per Inch
Mild Steel 1/4" 20
3/8" 16
1/2" 13
Stainless Steel 1/4" 20
3/8" 16
Grade 8 Hardened 1/4" 20
3/8" 16
This is a professional power tool. DO NOT let children come into
contact with the tool. Supervision is required when inexperienced
operators use this tool.
COMPONENTS (Fig. 2)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Trigger switch
B. Reset/lock-off button
C. Stationary cutting die
D. Moveable cutting die
E. Hex wrench
F. Hang hook
G. Battery pack
H. Battery release button
J. LED worklight
K. Cutting die cap screws
FIG. 2
A
B
J
F
H
G
D
C
E
K
ADJUSTMENT
WARNING: To reduce the risk of serious personal injury,
turn tool off and remove the battery pack before making any
adjustments or removing/installing attachments or accessories.
An accidental start-up can cause injury.
Removing, Changing and/or Replacing
the Cutting Dies (Fig. 2, 3)
WARNING: Never attempt to repair a damaged or worn
cutting die. This could weaken the die and result in a serious injury.
Discard the entire set and replace with a new set.
The tool is equipped with a stationary cutting die (C) and a moveable
cutting die (D). Each cutting die is fabricated with three different
thread cutting sizes. Cutting die orientation is critical when changing
or replacing the cutting dies.
English
10