User Guide

O
G
H
FIG. 4
FUEL GAUGE BATTERY PACKS (FIG. 4)
Some D
e
WALT battery packs include a fuel gauge which consists of
three green LED lights that indicate the level of charge remaining in
the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button (O).
A combination of the three green LED lights will illuminate designating
the level of charge left. When the level of charge in the battery is below
the usable limit, the fuel gauge will not illuminate and the battery will
need to be recharged.
NOTE: The fuel gauge is only an indication of the charge left on the
battery pack. It does not indicate tool functionality and is subject to
variation based on product components, temperature and end-user
application.
For more information regarding fuel gauge battery packs, please
call 1-800-4-D
e
WALT (1-800-433-9258) or visit our website
www.dewalt.com.
Trigger Switch (Fig. 5)
WARNING: This tool has no provision
to lock the trigger switch in the ON position
and should never be locked ON by any
other means.
To turn the tool ON, squeeze the trigger
switch (A). To turn the tool OFF release
the trigger.
Reset/Lock-Off Button
Cutting
Lock-off
Reset/Return
The spring-loaded reset/lock-off button (B) determines the direction of
the tool and also serves as a lock-off button.
To select normal cutting operation, release the trigger switch and
depress the reset/lock-off button on the right side of the tool.
The center position of the button locks the tool in the off position.
When changing the position of the reset/lock-off button, be sure the
trigger is released.
To select reset, depress and hold the reset/lock-off button on the left
side of the tool.
NOTICE: The rod cutter could stall during a cut either as a result of
a depleted battery, or as a result of cutting a material too hard or too
large.
FIG. 5
A
B
English
12