User Manual
6
ENGLISH
Proper hand position requires one hand on each dual handle
5
.
Running the Mixer (Fig. A)
WARNING:
• Do not use this tool to mix or pump easily combustible
or explosive fluids (benzine, alcohol,etc.).
• Do not mix or stir inflammable liquids
labelledaccordingly.
• Always check the flammability warnings on any
product before attempting tomix.
1. Hold the mixer with bothhands.
2. To start the unit, press the lock off lever
2
and then the
trigger
1
can be pulled in, turning on theunit.
3. To stop the tool, release thetrigger.
During the mixing process you should guide the mixer around
the container to ensure a more consistent mix. Continue until all
of the material is completelymixed.
NOTE: Please follow the processing instructions of the
manufacturer of thematerial.
Always be aware that the greater the viscosity of the material,
the greater the impact of the torque forces on themixer.
Proper Hand Position (Fig. C)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position asshown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
suddenreaction.
OPERATION
Instructions for Use
WARNING: Always observe the safety instructions and
applicableregulations.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.
Inserting and Removing a Paddle (Fig. B)
1. Insert the paddle thread into paddle holder
4
by turning
itclockwise.
2. Tighten the paddle with the 2 includedwrenches.
3. To remove the paddle, proceed in reverseorder.
DeWALT
ToolConnect Tag Ready (Fig. D)
Optional Accessory
Your mixer has a location point for mounting a
DeWALT
ToolConnect Tag. The
DeWALT
ToolConnect Tag is designed for
tracking and locating professional power tools, equipment and
machines using the
DeWALT
ToolConnect app. To install the
tag, remove the screws from the mouting holes
7
using a cross
bit screwdriver. Then proceed to mount the ToolConnect Tag by
following the instructions in the ToolConnectmanual.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Variable speed trigger switch
2
Lock off lever
3
Variable speed dial
4
Paddle holder
5
Dual handle
Intended Use
Your dual handle paddle mixer is designed for professional
mixingapplications.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
Your dual handle paddle mixer is a professional powertool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
Date Code Position (Fig. A)
The date code
6
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2019 XX XX
Year of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.