User`s manual

1
10
Introduction
S3 Graphics
Multiple Displays
Audio
LAN
Serial ATA
Rear Panel I/O
Ports
•S3GraphicsChrome
®
435 ULP
•500MHzcoreclock
•FourDDR2512Mbit32Mx16memory
•Displayports:2DVI-Iand1HDMI
- Does not support multiple displays using HDMI and 2
DVI-Iatthe sametime. Fordualdisplay, use the bottom
DVI-IwitheitherthetopDVI-IorHDMI.
•64-bitmemorybuswidth
•Dualrank256MBmaximummemory
•H.264/AVC - MPEG-4 Advanced Video Coding (AVC) hard-
ware acceleration
•VC1 hardware acceleration based on SMPTE 421M and its
derivative standards
•ChromotionHD2.0ProgrammableVideoEngine
•DX10.1UnifiedShaderArchitecture-ShaderModel4.1
•Supports4displays
-VGA+LVDS+BottomDVI-I+TopDVI-I
or
-VGA+LVDS+BottomDVI-I+HDMI
•RealtekALC2622-channelHighDefinitionAudio
•HighperformanceDACswith100dBSNR
•ADCswith90dBSNR
•Two stereo DACs support 24-bit PCM format for stereo au-
dio playback
•Three stereo ADCs support 20-bit PCM format for multiple
input streaming
•S/PDIFinput/outputinterface
•RealtekRTL8111DLPCIExpressGigabitEthernetcontroller
•Integrated10/100/1000transceiver
•SupportsFullDuplexflowcontrol(IEEE802.3x)
•FullycompliantwithIEEE802.3,IEEE802.3u,IEEE802.3ab
•Supportspowerdown/linkdownpowersaving
•Supports3SATA(SerialATA)interfaceswhicharecompliant
with SATA 1.0 specification
•SATAspeedupto3Gb/s
•1DC-in12Vjack
•2DVI-Iports(1sharedwithHDMIport)
•1DB-15VGAport
•1HDMIport
•1RJ45LANport
•6USB2.0/1.1ports
•Mic-in,line-inandline-out