User`s manual

31
2
Hardware Installation
TheVGAportisusedforconnectingaVGAmonitor.Connectthemonitor’s15-pin
D-shell cable connector to the VGA port. After you plug the monitor’scable con-
nector into the VGA port, gently tighten the cable screws to hold the connector
in place.
BIOS Setting
Congure the onboard VGA in the Chipset menu (“North Bridge Conguration”
submenu)oftheBIOS.Refertochapter3formoreinformation.
Driver Installation
Installthegraphicsdriver.Refertochapter4formoreinformation.
VGA Port
VGA