User`s manual

Hardware Installation

Chassis Instrusion Connector

The board supports the chassis intrusion detection function. Connect the chas-

sis intrusion sensor cable from the chassis to this connector. When the system’s

power is on and a chassis intrusion occurred, an alarm will sound. When the

system’spoweris off and a chassis intrusion occurred, the alarm willsound only

whenthesystemrestarts.

Hardware Monitor for Windows

Install the “Hardware Monitor for Windows” utility. By default, the chassis intru-

siondetectionfunctionisdisabled.Whenenabled,awarningmessagewillappear

when the chassis is open. The utility can also be congured so that a beeping

alarm will sound when the chassis is open. Refer to the “Hardware Monitor for

Windows”sectioninchapter4formoreinformation.

Ground

Chassis

signal