User`s manual

BIOS Setup

Primary IDE Master to Third IDE Slave

When you enter the BIOS Setup Utility, the BIOS will auto detect the existing

IDE devices then displays the status of the detected devices. To congure an

IDE drive, move the cursor to a eld then press <Enter>.

Select the type

of device connected

to the system.

BIOS SETUP UTILITY

← → Select Screen

↑↓ Select Item

Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Primary IDE Master

Device :ATAPI CDROM

Vendor :PIONEER DVD-RW DVR-216

LBA Mode :Supported

PIO Mode :4

Async DMA :MultiWord DMA-2

Ultra DMA :Ultra DMA-4

Type

PIO Mode

DMA Mode

Advanced

[Auto]

Type

Selects the type of IDE drive connected to the system.

PIO Mode

Selects the data transfer mode. PIO means Programmed Input/Output. Rath-

er than have the BIOS issue a series of commands to effect a transfer to or

from the disk drive, PIO allows the BIOS to tell the controller what it wants

and then let the controller and the CPU perform the complete task by them-

selves. Your system supports ve modes, 0 (default) to 4, which primarily

differ in timing. When Auto is selected, the BIOS will select the best available

mode after checking your drive.

Auto

The BIOS will automatically set the system according to your hard disk

drive’s timing.

Mode 0-4

You can select a mode that matches your hard disk drive’s timing. Caution:

Do not use the wrong setting or you will have drive errors.