User`s manual

BIOS Setup

Super IO Configuration

This section is used to congure the I/O functions supported by the onboard

Super I/O chip.

Allows BIOS to select

Serial Port 1 Base

Addresses.

BIOS SETUP UTILITY

← → Select Screen

↑↓ Select Item

Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Congure Super IO Chipset

Serial Port1 Address

Serial Port2 Address

Serial Port2 Mode

PWRON After PWR-Fail

W83627DHG.WDT Time

Advanced

[3F8/IRQ4]

[2F8/IRQ3]

[Normal]

[Off]

[000]

Serial Port1 Address and Serial Port2 Address

Auto

Automatically selects a base address for the COM port.

3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4

Selects the COM port’s base address.

Disabled

Disables the COM port.

Serial Port2 Mode

COM port functions as a serial port or IrDA. You cannot use both at the same

time.

Normal

Sets the COM port to serial port mode.

IrDA

Sets the COM port to IrDA mode.

ASK IR

Sets the COM port to ASK IR mode.