PBX Integration Board User's Guide

Dialogic
®
PBX Integration Board User’s Guide
4.7. NEC NEAX 2000/2400 PBXs and Electra Elite KTS
The Dialogic
®
PBX Integration Board has either four or eight channels that
can be connected directly to a station module in either a NEC PBX or a NEC
KTS.
The supported PBXs are:
• NEAX 2000 IVS, IVS2, and IPS
• NEAX 2400 IMS
The supported KTS is:
• Electra Elite
The NEAX 2400 IMS and NEAX 2000 IVS, IVS2, and IPS are fully-featured
PBXs that can provide thousands of ports and many PBX voice and data
features. The PBXs/KTSs use digital signaling to control their station sets and
digitize voice.
The Electra Elite is a fully digital KTS that can support up to 48 or 192 ports.
The PBXs and KTS have many standard features that are supported by the
Dialogic
®
PBX Integration Boards, such as:
• direct inward dialing (DID)
• speed dialing
• hunt groups
• message waiting indication
• user programmable Feature Keys
• called/calling number identification
• call forwarding
4.7.1. NEC Programming Requirements
There are specific switch programming requirements that apply if using a
Dialogic
®
PBX Integration Board with a NEC PBX or KTS. Pay attention to
150