User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 141
Dialogic Corporation
4. Save the configuration and repeat the configuration procedure for all target boards.
5. Start the target boards using DCM.
Execute the LineAdapt Utility to Discover Optimum Settings
Use the following procedure to execute the LineAdapt utility and discover the optimum
settings for the target boards:
1. Open a command window.
2. Execute the LineAdapt utility (located in the bin directory) in Prompting Mode to
select and adapt the target boards and channels as follows:
LineAdapt
Note: For running the utility in Command Mode or to use command line
parameters, see Section 1.43.5, “LineAdapt Utility Command Line Interface”,
on page 145.
3. The utility displays a list of all supported boards that are recognized (started) and
shows the logical ID (for DM3 Boards) or board ID (for Springware Boards), location
(bus/slot), and the number of channels for each board, along with a prompt for
selecting the target boards, similar to the following:
Please Enter the Boards you would like to Adapt. ‘A’ for All or ‘Q’ to
Quit
BoardNumber BUS SLOT BoardName
01 00 10 D/41JCT-LS #0 in Slot 0/10
Number Of Channels = 4
02 02 04 D/120JCT-LS-Rev2 #1 in slot 2/4
Number Of Channels = 12
03 01 03 DI0408-LS-A-R2 #2 in slot 1/3
Number Of Channels = 4
Selected Board Options >
Note: To quit the utility at any time, type
Q or q and press the Enter key. All keyboard
entries are case-insensitive.
4. To select all boards, type
A or a and press the Enter key.
To select one or more individual boards, type the board numbers (listed in the first
column) separated by a space (e.g., to select the D/41JCT-LS and the DI0408LSAR2
Boards, type
1 3 and press the Enter key).
To s e l e c t a range of boards, type the board numbers (listed in the first column)
separated by a dash or hyphen (e.g., to select the D/41JCT-LS and the D/120JCT-LS
Boards, type
1-2 and press the Enter key).
DMV160LP DMV160LP.PCD
DI0408LSAR2 DI0408LSA_REV2_ML2.PCD
DI0408LSA_REV2_ML3.PCD
DI0408LSA_REV2_ML4.PCD
Board
PCDFileName
(DM3 Boards)
FirmwareFileName
(Springware Boards)