User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 150
Dialogic Corporation
discovered are used to initialize the target boards when the discovery is complete.
However, since the settings are not stored, they will not be used to initialize the target
boards in the next download or system startup. If the -t parameter is not specified, the
utility will discover the optimum coefficients for the specified channels and store them
in the LineAdaptOptCoef.xml file for initialization with future downloads. The -t
parameter can also be used in Prompting Mode. When using the -t parameter in
Command Mode, the -b, -s, and -c parameters can be used to specify target boards
and channels for discovery; otherwise, the -t parameter applies to all supported and
recognized (started) boards.
-v
Specifies the flag to turn verbose display on, which displays activity messages on the
screen. The -v parameter can also be used in Prompting Mode to display more detail
than when verbose is off. By default verbose is off (suppressed).
1.43.6 Documentation
The online bookshelf provided with Dialogic
®
System Release 6.0 PCI for Windows
®
contains information about all system release features including features for application
development, configuration, administration, and diagnostics.
For more information about configuring Dialogic
®
Springware and DM3 Boards, see the
Dialogic
®
Springware Architecture Products on Windows
®
Configuration Guide and the
Dialogic
®
DM3 Architecture PCI Products on Windows
®
Configuration Guide.
Note: The online bookshelf has not been updated for this feature, so the Configuration Guides
do not currently include information about the line adaptation utility.
1.44 New QSIG Channel Mapping Parameter for E1
Boards
The Service Update provides a new QSIG channel mapping parameter for Dialogic
®
Boards that support E1 technology. This parameter specifies that bearer channel time
slots be numbered sequentially from 1 to 30 for the QSIG protocol. This mapping scheme
is the same as the one used on Dialogic
®
Springware Boards, and facilitates migration to
the newer generation DM3 Boards.
This new functionality is supported on the following Dialogic
®
Boards:
• Dialogic
®
DM/V600A-2E1-PCI Media Boards
• Dialogic
®
DM/V1200A-4E1-PCI Media Boards
• Dialogic
®
DMV600BTEP Media Boards
• Dialogic
®
DMV1200BTEP Media Boards