User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 247
Dialogic Corporation
There are 120 total voice resources. Any combination of the voice features (basic voice,
transaction record, and FSK) can be used up to a total of 120. In addition to these voice
resources, 120 conferencing resources (with echo cancellation and tone clamping) can be
used.
Note: Conference size is limited to 20 parties without bridging. Conference bridging can be used
to effectively expand a conference beyond the maximum size. Conference bridging
consumes conferencing resources, reducing overall board conference density.
Media load 10b can be used with all protocols supported on the DMV1200BTEP Board,
e.g., T1 ISDN, T1 CAS, E1 ISDN, E1 R2MF, and DPNSS/DASS2.
1.69.2 Configuring the Software
The new media loads can be selected by using the Dialogic
®
Configuration Manager
(DCM). For DMV1200BTEP Boards, the MediaLoad parameter appears on the Trunk
Configuration property sheet.
In addition to specifying the media load, the Trunk Configuration property sheet allows you
to individually configure network trunks on the DMV1200BTEP Board with different T1 or
E1 protocols. Based on your selections on this property sheet, DCM creates a composite
configuration file set (PCD, FCD, and CONFIG files). This procedure, which must be
performed before the board is started, is described in detail in the Dialogic
®
DM3
Architecture PCI Products on Windows
®
Configuration Guide.
1.69.3 Documentation
The online bookshelf provided with Dialogic
®
System Release 6.0 PCI for Windows
®
contains information about all system release features including features for application
development, configuration, administration, and diagnostics.
For detailed information about configuring DMV1200BTEP Boards, see the Dialogic
®
DM3
Architecture PCI Products on Windows
®
Configuration Guide.
Note: The online bookshelf has not been updated for this feature, so the Dialogic
®
DM3
Architecture PCI Products on Windows
®
Configuration Guide does not currently include
information about media loads QSB-U3, QSB-ML10, QSB-U2, and 10b.
1.70 New Media Load for Dialogic
®
DMV600BTEP Boards
The Service Update provides a new media load, DSB-U2, for the Dialogic
®
DMV600BTEP
Media Board. This new media load provides rich conferencing (conferencing, echo
cancellation, and tone clamping) with enhanced voice, FSK, transaction record, and fax.