User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 248
Dialogic Corporation
1.70.1 Feature Description
Predefined sets of features for Dialogic
®
Boards are provided in media loads. A media
load consists of a configuration file set (PCD, FCD, and CONFIG files) and the associated
firmware that is downloaded to the board. See the Dialogic
®
DM3 Architecture PCI
Products on Windows
®
Configuration Guide for more information about media loads.
The features and channel densities provided by media load DSB-U2 are as follows:
There are 90 total voice resources. Any combination of the voice features (enhanced
voice, transaction record, and FSK) can be used up to a total of 90. In addition to these
voice resources, 48 conferencing resources (with echo cancellation and tone clamping)
and 6 fax resources can be used.
Note: Conference size is limited to 16 parties without bridging. Conference bridging can be used
to effectively expand a conference beyond the maximum size. Conference bridging
consumes conferencing resources, reducing overall board conference density.
Media load DSB-U2 can be used with all protocols supported on the DMV600BTEP
Board, e.g., T1 ISDN, T1 CAS, E1 ISDN, E1 R2MF, and DPNSS/DASS2.
1.70.2 Configuring the Software
The new media load can be selected by using the Dialogic
®
Configuration Manager
(DCM). For DMV600BTEP Boards, the MediaLoad parameter appears on the Trunk
Configuration property sheet.
In addition to specifying the media load, the Trunk Configuration property sheet allows you
to individually configure network trunks on the DMV600BTEP Board with different T1 or
E1 protocols. Based on your selections on this property sheet, DCM creates a composite
configuration file set (PCD, FCD, and CONFIG files). This procedure, which must be
performed before the board is started, is described in detail in the Dialogic
®
DM3
Architecture PCI Products on Windows
®
Configuration Guide.
1.70.3 Documentation
The online bookshelf provided with Dialogic
®
System Release 6.0 PCI for Windows
®
contains information about all system release features including features for application
development, configuration, administration, and diagnostics.
Features
Supported
Enhanced
Voice
Transaction
Record
FSK Fax Conferencing with Echo
Cancellation and Tone Clamping
Channel
Density
90 90 90 6 48