User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 268
Dialogic Corporation
Known DM/IP Boards To select a coder when using Dialogic
®
DM/IP Boards
with Microsoft NetMeeting, invoke the coder list
(Tools>Options>Audio>Advanced) to bring your
preferred coder to the top of the priority list. For best
results, Microsoft NetMeeting and the DM/IP
component should be configured to use the same
coder.
Known DM/IP Boards Microsoft NetMeeting does not support VAD when
using Dialogic
®
DM/IP Boards.
Workaround: Do not set the VAD parameter in the
relevant demo configuration file (for example,
gateway_r4.cfg).
Known DM/IP Boards A connection to Microsoft NetMeeting will fail if the
T.38 fax coder is included in the capability list.
Workaround: Do not include the T.38 fax coder in the
capability list when establishing a connection with
NetMeeting.
Known IPY00023901 29646 DM/V Boards TSC_MsgSetChanStateCmplt error occurs on ml1b
ISDN load. Received following error message when
running QsigE1 on Dialogic
®
DM/V-B Board during
download. Error was seen in DebugAngel.
QHostFailed message 13:47:47.113|
002:CP1:[0xffff0000]TSC.000 Error -
tscSetChanStateCmplt( ) - line 1 replyCount 0.
The appearance of this message does not affect
normal operation.
Known IPY00021432 30972 DM/V Boards QERROR_WARNING warning may show up in
DebugAngel window for basic call control or voice
tests for Dialogic
®
DM/V(A) and DM/V(B) Boards.
Such warnings are generated due to extreme
load/stress conditions for CP pools while running
certain test applications and are taken care of by
Kernel CP Pools resize safety net.
Known IPY00021419 30224 DM/V Boards QERROR_WARNING warning may show up in
DebugAngel window for basic call control or voice
tests for Dialogic
®
DM/V(A) and DM/V(B) Boards.
Such warnings are generated due to extreme
load/stress conditions for CP pools while running
certain test applications and are taken care of by
Kernel CP Pools resize safety net.
Known IPY00020482 30167 DM/V Boards QERROR_WARNING warning may show up in
DebugAngel window for basic call control or voice
tests for Dialogic
®
DM/V(A) and DM/V(B) Boards.
Such warnings are generated due to extreme
load/stress conditions for CP pools while running
certain test applications and are taken care of by
Kernel CP Pools resize safety net.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description