User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 270
Dialogic Corporation
Known IPY00007996 32189 DM/V-B Boards During high density, over 700 channels per chassis, an
illegal termination of the system may result in a
conditional lockup or hang state.
Workaround: Either re-download or reboot the
Dialogic Boards if the application terminates
abnormally.
Known IPY00022125 22545 DM3 Fax Multi-page ASCII fax function always fails. This is a
known limitation of the product.
Workaround: Multiple pages can be sent by
generating 1 iott per page (use the same handle, but
define io_offset/io_length). However, most fax
devices allow receipt of a “long page”.
Known IPY00005994 33137 DM3 Fax While running fax load tests on Dialogic
®
DM3 E1 fax
boards, faxes stop transmitting after several hours.
Known IPY00035574 -- DM3 Firmware There is an interoperability issue when using Dialogic
®
DM/IP Boards with Dialogic
®
DM/V-B Boards (in PCI
or PCI Express form factor) in a Dell PowerEdge 6850
chassis. It has been observed with certain high-load
regression test applications run, a
QERROR_KILLTASK error is generated and reported
in the DebugAngel, and the DM/IP firmware crashes.
This issue occurs when running voice functionality on
the DM/IP and DM/V-B Boards simultaneously; the
failure is on the first voice operation on the DM/IP
board.
Workaround: Disable direct memory access (DMA)
transfers on the DM/IP Board by setting the doDMA
parameter to 0 (off) in DCM.
Known IPY00006407 36806 DM3 Firmware Error Message “Warning: PDK
SetProtocolOutOfService timed out” is generated
intermittently on Dialogic
®
DMV1200BTEP Boards
(with UL3 or ML10-LC R2MF firmware) when the
application is stopped and started without re-
downloading boards.
Known IPY00006393 36758 DM3 Firmware Random digit(s) missed in DNIS string on random
Inbound calls when running with CAS media loads.
Known IPY00006353 36792 DM3 Firmware Error message “Warning: PDK SIG_AlarmOff timed
out” is generated on Dialogic
®
DM/V1200A-4E1-PCI
Boards (with ml1b_qsa_r2mf firmware) when
downloading Dialogic
®
DMV1200BTEP Boards
connected to them.
Known IPY00023900 28301 DM3 Network Errors occur when trying to use the phone
application's dial pad: Error: Error 0x500 Description
{No Description Available} Data {ErrorMsg 0xa0002
ErrorCode 0x500 Data {0x0 0x0 0x0 0x0}}
Workaround: Ignore the errors.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description