User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 274
Dialogic Corporation
Known HDSI Boards A Station Interface Box (SIB) firmware upgrade may
be required to support the 25 Hz and 50 Hz ring
frequencies provided in the country-specific
configuration files. You can use the kernelver utility to
retrieve the Dialogic
®
HDSI Board and SIB firmware
versions.
To retrieve the firmware versions, start the HDSI
Board in DCM and then run kernelver twice (once for
the HDSI Board firmware version and once for the SIB
firmware version) using the following syntax examples.
To retrieve the firmware version of the SIB, run:
kernelver -bxx -p1 -s
where xx is the LogicalID of the HDSI Board attached
to the SIB. The LogicalID for a given Dialogic
®
DM3
Board can be determined through DCM. For details,
refer to the DCM Online Help.
To retrieve the firmware version of the HDSI Board,
run:
kernelver -bxx -p1
Known IPY00013365 19303 Host Admin DCM fails to detect any Dialogic
®
DM3 Boards when
one unrecognized board is present.
Known IPY00013282 17053 Host Admin DCM fails to detect any Dialogic
®
DM3 Boards when
one unrecognized board is present.
Known IPY00013252 17052 Host Admin DCM fails to detect any Dialogic
®
DM3 Boards when
one unrecognized board is present.
Known IPY00009150 28379 Host Admin The Error code in NCMApi.h says
“NCME_RELEAS_TIMESLOT” instead of
“NCME_RELEASE_TIMESLOT”.
Known IPY00008501 31050 Host Admin Listboards will report an error on the screen if it is run
after a “single stop” operation has been performed on
some of the boards. The problem is not seen as long
as all of the boards are running (i.e., no boards have
been stopped).
Workaround: Run listboards with the “-l2” option,
which runs the updated version of listboards.
Known IPY00008491 31206 Host Admin When DSS is started or stopped programmatically via
the NCM API and while the DCM GUI is already
running, the service status is not updated.
Hitting the refresh button will refresh the GUI and
show the correct service status. Alternatively, if the
GUI is opened after the service is stopped or started,
it reflects the correct status.
Known IPY00007797 31695 Host Admin Data backup and migration will not work with Terminal
Services.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description