User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 283
Dialogic Corporation
Known
(permanent)
IPY00022262 27343 Global Call When using the us_mf_io ICAPI protocol (and
possibly other ICAPI protocols) with Dialogic
®
Springware Boards and using the dx_ method of call
analysis, fax tones may be misinterpreted if the
ca_pamd_spdval field is set to PAMD_FULL in the
DX_CAP structure.
Workaround: Setting the ca_pamd_spdval field to
PAMD_ACCU always gives the correct fax tone
detection.
Known
(permanent)
IPY00021424 30376 Global Call This release does not support the ANAPI library or
protocols. Customers should migrate to the equivalent
Analog PDK protocol.
Known
(permanent)
IPY00022261 27289 Global Call on
ISDN
When using Dialogic
®
Global Call APIs and ISDN call
control APIs in the same application, the user
application must include gclib.h before cclib.h:
#include <gclib.h>
#include <cclib.h>
Known
(permanent)
IPY00028395 35879 Host Admin During system startup, if the system is configured to
use DHCP, network connectivity problems may cause
the DHCP service to respond slowly or not at all.
When this occurs, DCM may fail to start the Dialogic
®
Boards. This may happen even if Remote DCM is not
used.
Workaround: The problem may be resolved either by
correcting the network connectivity problem or, if
you are not using Remote DCM, by adding the
following line: ooc.iiop.host=127.0.0.1 in the
section titled “Settings For All Servers” in the
dlgadmin.config file located in the dialogic/cfg
directory. This will cause Remote DCM to not
operate, but DCM will now be able to successfully
start the boards locally.
Known
(permanent)
IPY00008157 32588 Host Admin CTBusBroker posts a warning message in the event
log saying that FRU doesn’t support common media
type.
Workaround: Ignore the message, as it doesn’t affect
system operation.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description