User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 291
Dialogic Corporation
Resolved IPY00034678 -- 125 CSP For Dialogic
®
D/41JCT-LS Board CSP application,
dx_playiottdata( ) fails after ec_listen( ) to route any
timeslot.
Resolved IPY00031529 36814 108 CSP The mapping of CSP channels is not being handled
correctly on the Dialogic
®
D/120JCT Board during
Earth Recall processing, which can lead to an assert
in dslac_dd.c.
Resolved IPY00011782 29318 -- CSP TEC_VAD event does not occur when DM_VADEVTS
is set by ec_setparm( ).
Resolved IPY00010776 35105 63 CSP The ec_stopch( ) function does not always return a
TEC_STREAM event.
Resolved IPY00009001 34393 39 CSP Echo canceled data transmitted over the SCbus to
another channel using the CSP ExtraTimeslot feature
still contains echo.
Resolved IPY00008046 32435 18 CSP There is no CSP extra timeslot assigned even though
ExtraTimeslot is set to ON in DCM with the CSP
firmware selected. As a result, ec_getxmitslot( )
returns 0 and there is no way to share the echo
canceled data with another channel through the
SC/CT Bus.
Resolved IPY00006862 36830 98 CSP ec_stream( ) returns -1 when running with a CAS
protocol.
Resolved IPY00030909 35327 70 CSP Demo Running the VoiceDemo after running the CSPAuto
demo gives the error message “Unexpected event
received 0x89, error 96” after selecting play Vox.
Resolved IPY00030605 25864 -- CSP Demo For CSPdemoDM3 demo, the “wait for ring/wink”
option (-w) does not work for Dialogic
®
DM/V-A
Boards.
Resolved IPY00020943 24719 -- CSP Demo Typos in printf statements of cspdemo code may
mislead troubleshooting.
Resolved IPY00009423 32858 18 CSP Demo CSPAuto demo fails to return TEC_STREAM event if
more than one process is run per board.
Resolved IPY00033410 -- 111 D/120JCT-LS When using five Dialogic
®
D/120JCT-LS Boards (CSP
firmware), Dialogic
®
service will not start after a
restart.
Resolved IPY00032244 36750 108 D/240JCT-T1 A Dialogic
®
D/240JCT-T1 Board that is running NTT
protocol incorrectly accepts the next incoming call
while the previous call is not released by host.
Resolved IPY00031535 36852 108 D/240JCT-T1 ISDN channel hang occurs when Dialogic
®
D/240JCT-
T1 Board receives a STATUS message in a particular
ISDN call state.
Resolved IPY00009017 32209 18 D/240JCT-T1 When dualcall feature is enabled, firmware selects
channel 1 for incoming call while the channel is being
used for outbound call.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description