User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 294
Dialogic Corporation
Resolved IPY00041178 -- 178 Diagnostics When Dialogic
®
System Release 6.0 PCI for
Windows
®
is installed on a partition other than C, the
d82diagutil application cannot locate the voxcfg file
because it is looking for it on the C drive instead of the
drive where the Dialogic
®
System Release is installed.
Resolved IPY00037708 -- 148 Diagnostics The its_sysinfo tool, which is used to collect data
including a PCI firmware dump, is not collecting a full
memory dump.
Resolved IPY00037643 -- 160 Diagnostics Using Visual Studio (V6 or 2005) to attach to a running
process causes an access violation in
LIBRTFMT.DLL.
Resolved IPY00008420 32765 18 Diagnostics Under certain call scenarios and when the application
first starts, GetCallid errors are logged to DebugAngel.
If not regularly checked, this file will grow. If this
message is benign, it should not be logged.
Resolved IPY00012765 28171 -- Dialogic System
Service
Memory leaks with every Dialogic
®
System Start/Stop
iteration. Repeatedly stopping and restarting
eventually consumes all memory.
Resolved IPY00041078 -- 178 DM/IP Boards Unknown audio or DTMF is being sent from a
Dialogic
®
DM/IP Board at the beginning of a SIP call,
which precedes the expected audio to be heard from
the file played.
Resolved IPY00038391 -- 174 DM/IP Boards Dialogic
®
DM/IP Board stops returning events due to a
DSP failure.
Resolved IPY00038190 -- 166 DM/IP Boards When running high volume load tests with Dialogic
®
DM/IP Boards to test SIP call control and media
activity, the DM3 firmware reports data access
exceptions from “Task:0x1993418 StatesTask” in
DebugAngel logs. During this time, all active calls get
suspended and performing media activity is not
transmitted across the network to other end point.
Resolved IPY00031560 36801 113 DM/IP Boards When calling a Dialogic
®
DM/IP Board using G729a
codec, the volume coming from the board will
decrease when DTMFs are sent with RFC2833.
Resolved IPY00031550 36859 105 DM/IP Boards RFC2833 digits sent continuously from Dialogic
®
DM/IP Board.
Resolved IPY00022013 29211 -- DM/IP Boards For ipvs_evr_isdn_net5_307, using the IPML test
series, DTMF/tone tests have about 80% failure rate in
detecting the digits/tones accurately.
Resolved IPY00021448 31633 22 DM/IP Boards When using Dialogic
®
DM/IP Boards, the Type Of
Service (TOS) byte cannot be set dynamically using
either the Dialogic
®
Global Call API or the Dialogic
®
IP
Media Library API.
Resolved IPY00020968 28273 -- DM/IP Boards An ARRAY FULL failure can occur on the PQ-II
processor (SP13) on Dialogic
®
DM/IP Boards in a bulk
SIP-call environment when more than 80% of the
channels are being used on each board.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description